Subscribe to Make Magazine Today!

relay 555k A Micro Relay at Work
htsybluxcykpudib A Micro Relay at Work

After our Monkey Couch Guardian project went live last week, I realized there was some wonderment about how the Single Pole Double Throw (SPDT) relay functioned. Not satisfied with simply verbally explaining the switching going on inside this mysterious black box, I wanted to visually show the relay in action. Aha, “A GIF!,” I thought to myself.

Relays come in many package configurations, but I specifically wanted to use the 5V DC micro relay we used to trigger the toy monkey. I carefully cut away the case around the relay using my utility knife, by slowly shaving down the corner edges until I could snap the lid and then the sides off, revealing the relay. Since I don’t have a PIR sensor available, and simply wanted to actuate the relay, I needed a novel circuit. Low and behold, a Flickr user posted this simple circuit to the MAKE Flickr pool in 2009 for driving a relay with the Arduino’s 5V power supply. For R1 I used a 1KΩ resistor; for TR1 I used a 2N2222 transistor; and for D1, I used the 1N4004 rectifier diode.

Now you can see below, when current passes through the coil it produces a magnetic field and triggers the springless armature. In our project, this switches the monkey from a silent toy into a cymbal-banging guardian, but you could easily use this to drive many types of switching circuits.

relay 20121009 174425 A Micro Relay at Work

Slowly shave off the edges of the relay’s plastic case to reveal its innards. First, shave and remove the top, then shave and remove the sides, leaving the base intact.

relay 8758 A Micro Relay at Work

relay 8809 A Micro Relay at Work

After removing the coil’s sheath, the wire and power leads are seen here.

relay 8812 A Micro Relay at Work

The armature pulled back, exposing the relay’s core.

Sign up below for the Weekend Projects Newsletter to receive the projects before anybody else does, get tips, see other makers’ builds, and more.

Sign Up for the "Weekend Projects" Newsletter

See all of the Weekend Projects posts

Nick Normal

I’m an artist & maker. A lifelong biblioholic, and advocate for all-things geekathon. Home is Long Island City, Queens, which I consider the greatest place on Earth. 5-year former Resident of Flux Factory, co-organizer for World Maker Faire (NYC), and blogger all over the net. Howdy!

blog comments powered by Disqus

Related Supplies at Maker Shed


Get every new post delivered to your Inbox.

Join 29,177 other followers