The folks over at Defense Distributed, the home of the Wiki Weapon Project, have successfully fired an AR-15 semi-automatic rifle with a 3D-printed lower receiver. They were able to fire off only six rounds before the part failed, but some would consider that a pretty decent outcome considering it’s composed of printed plastic. Now, the entire gun is not printed–just the lower receiver (the regulated part), but it’s a good first step. Regardless of your stance on gun control (or conceptual lack thereof), this project is worth keeping an eye on. [via technabob]
Get a copy of the MAKE Ultimate Guide To 3D Printing today!
- 3D Printers Buyer's Guide — 15 Reviewed
- Getting Started in 3D
- Learn the Software Toolchain
- 3D Design for Beginners
- 3D Printing without a Printer
That seems to be the weak part: a bit of FEA
Terrific! Just what the world needs….the ability to print a firing weapon that can kill/maim at a distance AND blow up in your face!
You’re right. Maybe if we ignore it, it’ll go away.
“composed of”, not “comprised of”.
Glenn, I’m not an English major, but I’m pretty sure it can be used in this form.
Composed: “to form by putting together” is from http://www.merriam-webster.com/dictionary/compose
Bill
Silly me… reversed them.
Comprised: “to be made up of”
http://www.merriam-webster.com/dictionary/comprised
Glenn is correct. http://grammar.quickanddirtytips.com/comprise-versus-compose.aspx
Before anyone gets worried about 3D printing working guns, it should be kept in mind that all the actual “shooty” bits – the chamber, barrel, breech, etc – are in the upper receiver, and the one used here is a real one. To put it another way, all the important parts that shoot the bullet are from a real rifle, all in one piece.
In an AR patterned rifle (which this is) ammunition is loaded into and fired from the *upper* receiver (not the *lower* receiver, which is what was printed here.) The lower receiver is subject to relatively low stresses and is not where any of the actual bullet-shooting part happens. The lower is the stock and trigger and holds the magazine. The upper is the barrel and chamber and all the parts that go BANG.
People have made working lower receivers out of wood (as opposed to 3D printing one), just to prove it can be done. Build a lower out of wood or plastic (or 3D print one…) and stick a “real” upper on it, and there you go: working rifle.
This isn’t to diminish how interesting it is to 3D print a working lower; but if you don’t know much about firearms it’s easy to jump to conclusions.
Also, in the USA it is perfectly legal to build your own firearms. (If you want to sell them then that’s something different, though.)
The part that might worry people is that the other parts can be mail ordered or otherwise purchased without a background check, so, e.g. a felon could obtain a gun this way when he normally would need more serious machinery. I am not too worried about it personally because I think it would be much easier to just buy a used rifle from a private owner. Also because assault rifles are so rarely used for crime.
A felon would never go to the trouble to 3D print a gun to commit a crime. They’re felons or, if you prefer, criminals with criminal minds. They simply steal from others that which they need. It’s the economics of effort and opportunity. This mode of production favors felons least and liberty minded individuals most.
It doesn’t seem to really favor anyone but the hobbyist/experimenter. I guess I don’t know enough felons to make statements about all of them, but I did know two (a little) and neither was a thief. One was a pot smoker who had a coworker who was under pressure by authorities to provide details about where he got his drugs. The coworker knew that this guy was a smoker and asked if he had any to spare. Authorities monitored the transaction and he went to jail for year. That guy was a total hippy and wouldn’t want to touch a gun, legally or illegally. The other had some incident at the Canadian border involving illicit substances. He is a believer in 2nd amendment rights and former CCW permit holder but doesn’t carry now because of the felony. Based on these two guys I agree that felons wouldn’t go through the trouble, but not for the same reasons.
Sorry but most guns are illegally purchased, not stolen, because its far easier to straw purchase guns or get them on the secondary market and never register them than it is to find a gun owner and steal from them. If the original purchaser of a gun was held responsible for what happens
Well i think that makes the point, don’t you? A fellon isn’t going to 3d print something as I am asserting. Equipment cost being one barrier. And as you rightly point out – straw purchases are illegal and the straw purchaser is as much a criminal as the person they knowingly provide the gun to. Making tools less accessible will not change criminal behavior. Those that aim to misbehave will. The problem isn’t the gun or the 3d printer – it’s the culture that devalues human life.
A competent home workshop is an arsenal. Pakistani and Afghan craftsmen have been making copies of Western firearms with no more than hand tools for over a century.
Here is the story of Boris who built an AK-47 from a shovel.
http://www.northeastshooters.com/msa/mysa_redir.php?a_id=3&t=1&c=0
People have been making guns for over four hundred years. It’s Manufacturing 101.
The Email Subject line “3D-Printed Gun …” is a bit alarmist.
Then the Email text says ” 3D-printed lower receiver”.
Then it is written on the website, above “entire gun is not printed–just the lower receiver (the regulated part)”
The rest of it is actual gun parts. Hardly a “3D-Printed Gun.”
The actual non-printed gun parts survived. The failure is in the printed grip, as in, “The handle broke off.” Hardly a “3D-Printed Gun.”
Sheet metal and hand tools can become an AK-47 receiver, but there’s still the need for barrel, bolt, etc. just like this example.
That said, photo or R.F. -activated, nano-particle-reinforced, sintered metal may be the future …. but it will be a while.
Check Out this rebuttal:
No, you can’t download a gun from the Internet
http://www.zdnet.com/no-you-cant-download-a-gun-from-the-internet-7000002108/
“Summary: 3D printers and home users can build quite a few things, but despite the internet media hype, you can’t print a working firearm.”
This is a solid proof of concept. Yes, it’s just the lower receiver, but it shows progress towards the ultimate goal of the project. Ever hear of a zip gun? I don’t think they’re trying to produce something that can get through airport security, but rather something that can easily be reproduced, more accurate, and less lethal to the user.
Reply to Adam:
Making a single, non-stressed part of a highly stressed mechanism is hardly solid proof of concept for a “3D-Printed Gun.”
Zip guns have metal strong enough to take tens of thousands of PSI. This does not come close.
What they’re trying to easily produce in its ENTIRETY is way yonder.
Adam,
You have just turned the corner from Journalist to biased writer. You are defending your own story from logical and experienced rebuts. These replies come from your readers who are your only judges after the editor who chose you to, “UNBIASEDLY REPORT ON A STORY”. Now you are now defending the future capability of 3D printing and it’s politics for this one story. Get over it it, is is a bad story you wrote! You are not a soothsayer, just some one with inside need for 3D printing to enter the limelight so you can have more stories (income). Stop. Re-read these intelligent replies and acquiesce to your palsy report on a fringe insanity. Call it what it is, a Flash Headline meant to deceive.
Please, as an owner of a Printrbot LC Plus and prototyper from way back, protect me from the ire of ignorant power readers and inform them only of the wonderful possibilities that can change their life for the better. Gun stories, particularly in light of recent events, are off limits to empty ‘Glam Journalism’ like this non-story. It broke, it didn’t work even as the simplest part of the machine! Duh!
3D printers make millions of items well so you report on one BAD sub part of a BAD idea. BAD STORY! Your editor deserves a refund!
Um… its not ALL been made with a 3d printer so the claim of a homemade 3d printed fireable weapon are still invalid. You hear that nice metalic CLICK when he loads the first round? Metal… not printed.
Not sure what all of the fuss is about. If you have a Mill you can make real parts. Not done too often because it is expensive and anyone with the skill doesen’t need the problems that come with illegal gun construction.
Guns, Mills, 3-D printers are all tools. Without a human to use or abuse these tools, like all other tools, just sit there.
” illegal gun construction.” Where, in which country? Perfectly legal in the US.
Yeah, I don’t get where this “illegal gun construction” thing is coming from. Nonsense.
Leave out that last sentence and you’d avoid this moronic ill informed comment war.
“Defense Distributed”
I love the euphemistic way people like to use the word defense sometimes.
The AR platform is pretty ideal for home defense. Would be better so if the ATF would let you cut the barrel down to about five inches.
The powder type and charge is usually designed to burn within a full length barrel. If the barrel is short, especially way-short, much of the burn will be external. “Muzzle Flash” can locate the shooter (you) and temporarily blind the shooter (you). Muzzle blast can temporarily deafen the shooter (you). Plus the projectile will not have total normal energy.
(Since the M16 “Eats where it poops.”, it should not effect cycling … until it gets filthy.)
I feel as though this opens up a new market for inovation and design, regardless that it is for weapons. It is a new door for innovative makers to break the chains that multi-national-military-industrial-conglomerates have been shackling the market with every since Colt. I’d rather Joe Shmo make a profit off war than Halliburton or Lockheed. This is what making is all about no? Breaking into and freeing the market so it becomes accessible to everyone. As far as some gangsters or terrorists getting a hold of this ability, they already have (as said in a comment previous). Crime organizations have far more productive and accessible options for manufacturing and obtaining weapons then even a 3D printer could offer.
i just want to learn how to make something, anything, before i die. how come some people are so adept at making stuff, and some are so inept at it?
It’s mostly desire. You have the desire, so you’re most of the way there. As long as you pay attention and keep trying through failures (which happen to all of us of course) you will learn more than you ever thought possible.
And try for originality, redesign something or bring up an idea from scratch. Being at the computer kills my creativity. think long and hard about the design of something and manipulate it in your mind until you like what comes out.
Like most stuff, patience and the willingness to learn are many times more important than skill.
frivcm at gmail , com
Pingback: MAKE | Your Comments
Ummmm…. hey wiki weapon. Thanks. I’d love to see kids with a gun and not a soldering iron. I mean gosh, “making” right, even if it kills us. Its totally a good idea to get people hooked on 3D printing thru guns (or making for that matter). I wonder what new and creative things the next generation of makers will think up.
But its all about “sticken it to da man” and “exercising your rights” right?
Proven fact – boys like dangerous things. If you find a boy interested in making a functioning fire arm just for the sake of the challenge, I’ll show you a future successful tool and die maker, machinist, craftsman or engineer. Don’t sell kids short just because the tool they make does something wicked cool with chemicals and high-tolerance parts. Baseball bats are used to off people far more often than guns anyway.
Pingback: In coming decades you’ll be able to 3D print a reliable gun | Netninja.com
Pingback: My Quiet Life » one more post about stupid guns
Rwanda is a small country with many problems!
Pingback: Breakfast Links - Points and Figures | Points and Figures
Pingback: MAKE | Thingiverse Cracks Down on Firearm Parts
Pingback: Thingiverse Cracks Down on Firearm Parts
Pingback: MAKE | 3D-Printed Gun Fires Real Bullets | Teme Blag
Pingback: 3D Printing The Future – Robot Central
Pingback: MAKE | The Face of Printable Firearms: A Conversation with Cody Wilson
Pingback: “Download this gun”: 3D-printed semi-automatic fires over 600 rounds | iReadTech - Tech new summary | All the tech news
Pingback: “Download this gun”: 3D-printed semi-automatic fires over 600 rounds | TechKudos
Pingback: “Download this gun”: 3D-printed semi-automatic fires over 600 rounds | My Blog
Pingback: “Download this gun”: 3D-printed semi-automatic fires over 600 rounds | jogleapp
Pingback: They still can’t make bullets from a 3-D printer | A Man With A Ph.D.
Pingback: More Gun News | The Bartelists
Pingback: “Download this gun”: 3D-printed semi-automatic fires over 600 rounds | Carlos' CosmicJAAM Blog
Pingback: Gotter laugh at der gun control nuts (3d gun printing) | CRUNCHY BOUTIQUE
Pingback: “Download this gun”: 3D-printed semi-automatic fires over 600 rounds | LiMiT
Pingback: “Download this gun”: 3D-printed semi-automatic fires over 600 rounds |
Pingback: “Download this gun”: 3D-printed semi-automatic fires over 600 rounds | Thought FTW
Pingback: 3D Printed Lower Receiver Withstands More than 650 Rounds, Gun Grabbers Panic | Vince's Blog
Pingback: 3D Printed Lower Receiver Withstands More than 650 Rounds, Gun Grabbers Panic | USGunban.org
Pingback: 3D Printed Lower Receiver Withstands More than 650 Rounds, Gun Grabbers Panic Dark Politricks
Pingback: “Download this gun”: More on 3D printing technology – The San Fernando Valley NRA Members' Council
Pingback: AR-15, 3D Printed Lower Receiver Withstands More than 650 Rounds, Gun Grabbers Panic | National Dog Press.us Headline News ©
Pingback: 3D Printed Lower Receiver Withstands More than 650 Rounds, Gun Grabbers Panic - Rise of the Right
Pingback: 3D Printed Firearms Companies Fight Back Against Gun Grabbers | LeakSource
Pingback: 3D Downloads of Semi-Automatic Weapons Hit The Internet | Family Survival Protocol
Pingback: 3D Printed Lower Receiver Withstands More than 650 Rounds, Gun Grabbers Panic | Ron Larsen's Freedom Train
Pingback: “Download this gun”: 3D-printed semi-automatic fires over 600 rounds And the Department of Justice says there’s nothing illegal about it, either. | News Wire 24
Pingback: 3D Downloads of Semi-Automatic Weapons Hit The Internet | Pakalert Press
Pingback: “Download this gun”: 3D-printed semi-auto fires over 600 rds | BlindToTheTruth
Pingback: 3D Printed Lower Receiver Withstands More than 650 Rounds, Gun Grabbers Panic // FreedomBrief.com // Question everything.
Pingback: Want a 3D Gun? You can own one! | Truth Progress
Pingback: 3D Downloads of Semi-Automatic Weapons Hit The Internet | PN
Pingback: Control de armas? Si te compras una impresora 3D, te puedes imprimir una bicicleta, una casa , el arma que quieras y hasta drones « NUEVA EUROPA- Nueva Eurabia
Pingback: Control de armas? Si te compras una impresora 3D, te puedes imprimir una bicicleta, una casa , el arma que quieras y hasta drones « Milenio
Pingback: New 3D Weapon Download: The "Feinstein AK Mag" | Pakalert Press
Pingback: The DC Post » New 3D Weapon Download: The “Feinstein AK Mag”
Pingback: Bientôt des armes à feu imprimées en 3D et vendues aux USA Montserrat Agence de Communication
Pingback: Des armes à feu à télécharger et à imprimées en 3D ! | le geek c'est chic
Pingback: Type 7 Federal Firearms License Granted For 3D Printed Guns
Pingback: 3D-Printed Guns Get Better | Disinformation
Pingback: 3D-Printed Guns Get Better | Conspiracy Theories
Pingback: 3D Downloads of Semi-Automatic Weapons Hit The Internet |
Pingback: Dawn of the Wiki Weapons: First Fully 3D-Printed Handgun “The Liberator” Available for Download | Truth11
Pingback: 3D Gun Printing: Click, Clip, Kill
Pingback: 3D Printed Lower Receiver Withstands More than 650 Rounds, Gun Grabbers Panic | Independent News Hub
Pingback: Cost Drops For Manufacturing 3D-Printed Weapons: The Lulz Liberator | Daddy Fix
Pingback: Cost Drops For Manufacturing 3D-Printed Weapons: The Lulz Liberator
// What's Trending
Raspberry Pi Design Contest
Seventeen Sneaky Secret Hides
A Maker Wedding
Teardrop Camper Trailer
Dad Builds Son an Iron Man Arc Reactor
10 Things to Connect to Your Raspberry Pi
Bringing a Classic Marklin Z-Scale Model Railroad to Life With Arduino
What to do with an 800 Lb Eucalyptus Slab
// What's Shared
A better way to slice a pumpkin
DIY Nerf Darts
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
In the Maker Shed: Minty Boost USB Charger
Mad’s Mouse House
Lace Princess Crowns
I Have a (Puzzling) Dream
Play the Rings of a Tree Trunk Like a Record
// Most Commented
Plastic Bags into Plastic Blocks: Revisited
10 Hot New Boards to Watch
Why the Maker Movement is Here to Stay
MAKE Asks: Roadside Hacks
DIY Hacks & How To’s: Convert From Battery Power to AC
Ten Tips for Hand Saws and Blades
How To Make Your Own Laundry Detergent
What to do with an 800 Lb Eucalyptus Slab
Trending Topics
Get our Newsletters
About Maker Media
Subscribe
to MAKE!
Get the print and digital versions when you subscribe