Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Banner Craft Podcast

Thrummed Bunny Slippers in 3 Adult Sizes
By Nikol Lohr

These slippers are soft as a bunny, thanks to their thrums — unspun wool knit right in for a warm, cushy, fleecy lining. They’re also quick as a bunny! Knit in bulky yarn, they have the same stitch count as your average worsted hat. Worked up quickly in economical ($5/100g ball) bulky wool, they’re a recession-busting and adorable last-minute holiday gift. And you can always omit the “bunniness” if your subject isn’t silly rabbit material.
Aside from the cush, these slippers have a great fit and actually stay on your feet, thanks to the heel shaping and wide button flap. They’re entirely seamless, knit sole first, with stitches picked up all around, then shaped from the sole up. The fat button strap is picked up near the edge and knit in place, as are the floppy ears. The wide flap gives the style gender neutrality, but you can also substitute a narrow strap for a girlier Mary Jane.
All About Thrums
Thrums are little chunks of unspun fiber worked periodically into your knitting. Each thrum is a separate piece worked into just one stitch, along with the yarn, and its ends are left sticking out on the wrong side of the knitting. Imagine duplicate stitch if you used a separate piece of yarn for each stitch, except here the yarn is fleece and you work it in while you knit instead of afterwards. On the right side of your work, you get a little pattern of Vs or hearts, but on the wrong side, you get a crazy shag rug of super awesome fluffy-wuffy warmness! The thrums will compress a little and felt together over time, becoming less puffy but just as cozy.
Bunnyhop Final5
Download the Pattern PDF | Subscribe in iTunes
(Right click to save PDF to your computer. More directions on downloading here.)
Update 12/24/09: Errata to pattern is updated in this post for Rows 11 & 12 and is not reflected in the PDF. We will update the PDF after the holidays.


Choosing a Fiber
Light, fine, bouncy fibers like Merino, Bluefaced Leicester (BFL), Corriedale, Rambouillet, and down wools make the best thrums (bypass the stronger, less-crimpy fibers like Lincoln or Wensleydale). Because the structural integrity of the thrummed fabric relies somewhat on the fibers’ ability to cling and felt, you’ll want to avoid superwash fibers. You can use combed top or roving. You can even use washed fleece, as long as the lock structure is intact; just separate out locks, and if they’re compressed, gently tease them before thrumming.
If you’re using commercially dyed combed top (solid colors or uniform blends), soak and dry it first. This will remove processing additives and decompress it. Just soak it (don’t agitate) in hot water for about 10 minutes, drain and squeeze out excess water in some towels, and let it dry. If you don’t have one of those dryer racks for shoes and sweaters, you can even dry it in the dryer (but don’t tumble-dry or else it will felt). The fiber will be airier and nicer to draft and thrum.
Hand-dyed fiber has already had any processing additives rinsed out, so it’s ready to go. Similarly, roving and the fluffier combed top you get from small mills like Zeilinger’s is also ready to go.
If you’ve new to unspun fiber, go with hand-dyed Merino or BFL combed top.
Thrums from Combed Top
Combed top is a rope of fiber from which all the neps, short bits, and vegetable matter have been combed. The fiber’s arrangement is very directional, which makes an easy prep for thrums.
Bunnyhop Thrums1
Unsoaked, commercially dyed top (compressed, with a chalky hand), hand-dyed top (fluffier and dense), and top from a small mill (loose and airy).
Bunnyhop Thrums2
Break (do not cut!) off a piece of top that’s about 8″ long.
Bunnyhop Thrums3
Pull off a little lengthwise strips, about 1/8″ – 1/4″ thick.
Bunnyhop Thrums4
I get 15- 20 strips from a piece of typical commercial top or about 7-10 from the fluffier type of top you get from a smaller mill.
Bunnyhop Thrums5
Draft out each strip, gently stretching the fibers apart, moving your hands every 3″-4″ and repeating. If the strip breaks, don’t worry; you can combine 2 shorter strips when you wind them. Drafting the fiber adds air to it. The more air you can trap in your fiber, the warmer and cushier it will be.
Bunnyhop Thrums6
After you draft it, it will be quite light and fluffy and about twice as long as the original strip.
Bunnyhop Thrums7
Wind each drafted strip around your thumb and forefinger in a figure eight, like you would if you were starting to wind a center-pull ball of yarn. I like the little figure eights to be 3″-4″ long. Smooth down the loose ends; they’ll stick to the rest. Make sure you get at least 2 full rounds, but it’s fine to end up with 3 or 4 depending on the thickness of that particular strip. It doesn’t matter if your thrums are different thicknesses; it’ll average out. Some people recommend using thrums about the same thickness as the yarn, but I like the pudgy thrums way better than the skinny ones. Keep in mind that the fatter your thrum, the longer you’ll need it to be to keep it secure in your knitting.
Bunnyhop Thrums8
Repeat until you have a nice pile of them If you have a lot of different colors, you can toss them all together to mix them up.
Bunnyhop Thrums9
Note: If you’re using hand-dyed top with dramatic color changes and you want to preserve the color progression and/or keep both slippers balanced color-wise, split the strip in half down the middle before you begin.
Thrums from Roving and Sliver
Roving is a rope of carded fiber with an irregular arrangement of fibers. Sliver is roving that’s been drafted slightly, so the arrangement of fibers is somewhat more directional, but for thrums, we’ll treat it the same as roving. Both include short fibers and lots of air, which makes a very warm prep, but also a little trickier to prepare for thrums.
Roving can also vary dramatically by fiber and mill. It can range from thick and chunky to narrow and wispy, so how much prep you need depends much on the product itself.
Bunnyhop Thrums10
Most roving will require some preparation. I like to tear off a strip a few feet long, and then draft the whole thing twice.
Bunnyhop Thrums11-12
Once you have a very thin strip, make 2-3 figure eight wraps, break the roving (don’t cut!), and repeat.
How-To Knit Thrums
While I knit continental in real life, I prefer to knit English when I thrum. This way, I can wrap the yarn first, then wrap the thrum, and when I pull it through, the yarn stays in the back; when knitting continental, the yarn tends to drift to the front. Continental also stretches the yarn a bit more as you go, which can loosen the thrums below while knitting the rows after the thrum. I’m not saying you can’t thrum continental; just keep an eye out.
Bunnyhop Thrums13
To insert a thrum into your knitting, start to knit the stitch as usual: insert your needle knit-wise, wrap the yarn, but before you pull it through the stitch and off the needle, wrap a thrum around it as well, then knit it as usual. To wrap the thrum, fold it over the needle and hold the ends together at the back of the work along with the yarn.
Bunnyhop Thrums14
Once it’s knit in, it will stay put unless it’s too short (if it’s borderline, give it a light tug by both ends from the back). When you pass the thrum on the next round, knit it together with its yarn as one stitch.

Pattern: Thrummed Bunny Slippers in 3 Adult Sizes

Materials

2 skeins Valley Yarns Berkshire Bulky (100g, 108 yds, 85% wool/15% alpaca, shown here in Light Pink) or Valley Yarns Northhampton Bulky (100g, 109 yds, 100% wool)
2 oz combed top or roving
see fiber recommendations (Art Club cotton candy merino combed top shown here)
Accent yarn for embroidering eyes, nose and mouth
A few feet of thin Merino or Rambouillet roving
must be roving, not combed top, plus a scrap of white yarn for the tail (optional)
Needles:
US10/6mm 16″ – 22″ circular needle
Gauge:
13 st=4″/10cm in plain stockinette without thrums
Notions:
2 – 1 ¼” buttons buttons
Yarn needle
Sewing needle and thread if your yarn needle is too big for your button’s holes
Size: Adult S (M, L)

S: Women’s 6-8/Men’s 4-6
M: Women’s 9-11/Men’s 7-9
L: Men’s 10-13
The thrum pattern shown here places 1 thrum every 3 stitches, every 4th row, with adjustments made for the size and shape of the particular row. The foot has a stitch count to accommodate the Thrum 1, Knit 2 repeat, with the centered toe stitch as the start of the round and an even number of stitches in either direction from the center toe stitch to the center back division.
Start your thrums centered on the 3rd row of the sole and at the center toe stitch of the 2nd rnd of the foot. Or feel free to wing it or stagger your thrums if you like.
CO 11 (13, 15)
Sole:
44 (52, 60) rows
All odd rows, except as noted: Sl 1, K to end.
All even rows: S1 1, P to 1 st from end, K1
Rows 17 (21, 23) and & 29 (31, 35): Sl 1, K1, M1, K to 2 st from end, M1, K2
Rows 35 (39, 45), 41 (45, 53), and 43 (49, 57): Sl 1, ssk, K to 3 st from end, k2tog, K1
Transition from sole:
Sl 1, K to end. Turn work.
Sl 1, K to end.
Bunnyhop Knit1
With WS still facing you, PU all edge and heel stitches all around sole, marking center back heel–63 (75, 87) st, including toe st.
Bunnyhop Knit2
You’ll have 22 (26, 30) sts on each side, 10 (12, 14) at the heel and 9 (11, 13) at the toe. The center toe stitch will be your center front, and your center back will fall between the back 2 stitches. It will be a little tight picking up the heel stitches, but your knitting will relax as you progress upward.
Bunnyhop Knit3
Turn work so RS is facing you.
Sl the first stitch, the lift the 2nd stitch from the right needle (was he first stitch before you slipped that one) over the slipped stitch and onto your left needle (the last stitch and first stitch of the round have just traded places.
Foot:
Round 1 – 7 (9, 11): Knit.
Round 8 (10, 12): K1, ssk, K to 2 st before center back marker, K2tog, ssk, K to 2 st before end, k2tog.
Round 9 (11, 13): K1, ssk, K1, ssk, K1, ssk, work around to 8 st before end, K2tog, K1, K2tog, K1, K2tog.
Round 10 (12, 14): K to 2 st before center back, K2tog, ssk, K to end of rnd.
L only: Repeat Last 2 rnds.
Round 11 (13, 17): K1, ssk, ssk, ssk, K to 6 st before end, K2tog, k2tog, K2tog.
Round 12 (14, 18): K to 2 st from back, K2tog, ssk, K to end.
Rounds 13 (15, 19): K1 P1 rib to 1 st from end, then…
Round 14 (16, 20): Using the last st from Round 13 and 1st st from Round 14, K2tog. Continue ribbing in pattern.
Round 15 (17, 21): K1 P1 ribbing.
Round 16 (18, 22): BO in pattern.
Strap #1:
With sole facing down and the toe facing to the left, looking at the last knit row before the ribbing, count 3 (4, 5) stitches right of center, then count 11 (13, 15) more st to the right as your starting point.
Bunnyhop Knit4
Working into the row beneath the ribbing, PU 11 (13, 15) st, picking up vertically into the bar in the center of each stitch.
All rows (except as noted): Sl1, K to end
Row 11 (13, 15): S1 1, K3 (4, 5), BO 3 st, K4 (5, 6) (so you’ll have a gap with 4 (5, 6) st on either side of it).
Row 12 (14, 16): Sl 1, K3 (4, 5), CO 3 st, K4 (5, 6).
Row 15 & 16 (17 & 18, 19 & 20): Sl 1, ssk, K to 3 st from end, K2tog, K1.
Last row: S1 1, ssk, BO to 3 st before end, K2tog, BO all stitches.
Strap #2:
With sole facing down and the toe facing to the right, count 3 (4, 5) stitches left of center. Working into the last row before the ribbing, PU 11 (13, 15) st, picking up into the bar in the center of each stitch. Proceed as above.
Ears:
With the toe facing you, and looking at the last row before the ribbing, count 4 (5, 6) st to the left.
Bunnyhop Knit5
You’re going to pick up the ears starting here, picking up horizontally through both legs of the stitch and working down the column of stitches.
PU 4.
Sl 1, K3
Sl 1, P2, K1
Sl 1, K1, M1, K2
Sl 1 P3, K1
Sl 1, K1, M1, K3
Sl 1, P4, K1
Sl 1, K3, M1, K2
Sl 1, P5, K1
Sl 1, K6
Repeat last 2 rows.
Sl 1, P1, P2tog, P2, K1
Sl 1, ssk, k2tog, k1
Sl 1, P2tog, K1
Sl 1, K2tog, psso
Do the same on the other side, except count down 4 rows before you start picking up stitches, and work up the column toward the ribbing.
Tail:
Bunnyhop Knit6
For the tail, you’ll make and lightly felt a roving pompom. You can make a regular pompom instead if you don’t have roving. Roving makes a fast-felting, irregular ball perfect for a tail. I used Mountain Meadow Merino roving.
Bunnyhop Final6
To make the pompom, wrap the roving around your index and middle fingers 3 times. Tie it off firmly in the center with some white scrap yarn, leaving a long tail. Cut the folded ends, just as you would with a yarn pompom. Roll the ball vigorously in between your palms, as if you were aggressively rolling a meatball. Using the tails, sew on the tail just below the ribbing on the center back.
Bunnyhop Final4
Bunnyhop Final2
Weave in the ends. Try on the slipper and decide where to position the button. Sew on the button and try out the buttonhole, tacking the ends to make it smaller if necessary.
Embroider the nose, mouth, and eyes.
Abbreviations
BO bind off
CO cast on
K knit
k2tog knit 2 together (decrease): knit stitches together as one
M1 make 1 (increase): lift the bar between the stitches from the front, knit into the back of the lifted bar to twist the bar and form a new stitch
P purl
RS right side
Sl slip stitch purlwise (unless noted otherwise, as in ssk)
ssk slip, slip, knit (decrease): slip 2 stitches knitwise, one at a time, then knit them together as one
st(s) stitch(es)
WS wrong side
Download the Pattern PDF | Subscribe in iTunes
About the Author:
Author Nikollohr
Nikol Lohr lives at The Harveyville Project with her partner, 2 cats, 7 sheep, and 7 hens. She’s the author of Naughty Needles & founder of Yarn School. She blogs at The Thrifty Knitter, is cupcake on ravelry, and queenievonsugarpants on Flickr.


Related

Comments

  1. Fabienne says:

    Superbe ! J’aime beaucoup ces chaussons, et j’espère en faire bientôt… Merci pour ces explications

  2. JMB says:

    Can’t download the bunny slipper pdf file. Getting an error message.

  3. MadScientistK says:

    I can’t get the pdf to open either. It stops itself as soon as it starts loading (in firefox with the adobe plugin).
    I love this pattern! It’s nice to see such a comprehensive way to prepare the thrums. My results with thrummed items in the past have been pretty bad but now I know what I did wrong. Thanks for sharing this!

  4. Francesca says:

    The PDF will not load in Firefox or Google Chrome, but I got it to load in Microsoft Internet Explorer (that’s why I keep that danged browser on my computer).

  5. Natalie Zee Drieu says:

    For PDFs, please don’t click to view in your browser. Right click the link and save the file to your desktop.
    We have some directions here:
    http://blog.craftzine.com/archive/2009/09/ask_craft_downloading_our_pdfs.html

  6. Anonymous says:

    These are too cute! Can they be made without the thrums?

  7. Kate Magrath says:

    Not only is it a really cute design, it is the best explanation of thrums I have ever seen. Now I get it! And I will be making these.

  8. Kara says:

    Well, actually, I tried downloading it the way the instructions said and yesterday it stopped in the middle. Luckily it worked today!

  9. Carrie says:

    I love the slipper and I am totally stoked to make them. I made the first one and it doesn’t look the same. I am confused on where the round starts? If the round starts at teh center toe stitch, that isn’t where my yarn ended up when I picked up all the stitches around. I am using dpn’s and I have 30 on each side, 14 at the heel and 13 at the toe, however my yarn had ended at the end of the row, and wants to begin down the side. What am I missing?

  10. cupcake says:

    When you pick up stitches around the sole, you’ll be starting in one corner of the toe box, because that’s just where, out of necessity from knitting the sole, your knitting just happens to bring you. That doesn’t have any bearings for the foot portion. After you’ve picked up the stitches, that spot has no importance.
    You’ll use the center front/toe stitch to mark your start of row and the center back (between stitches) to mark your center heel. These are the two spots where you’ll be working increases and decreases.
    That first round will be a bit of an oddball, because where you turned your work does not mark the start of your round. Just work around and continue counting normally from the center toe stitch.

  11. cupcake says:

    Yes, you can make them without thrums, but they’ll be slightly smaller. It should work out fairly well at gauge, because while the slipper will be smaller, you don’t need extra room for the thrums. The fit should be a bit snugger.

  12. paloma says:

    These slippers are so cute, and I am dying to get them knitted. I am just confused as to the start. Could you please explain to me the sole? I am not understanding, so I can visualize it, where exactly on the foot you are starting. It seems it should be starting from the front or back and working towards the opposite, but the picture seems to indicate you are working from one side of the foot to the other. Also, I don’t understand the S1 or SI. I hope you can help me. I really am looking forward to getting these slippers going.
    Thanks so much for your help and keep up the creativity!
    Paloma Vachon
    otter18@juno.com

  13. olive says:

    Thank you very much, I can’t wait to start knitting these,I have one question. This is one of my first times using circular needles,on this pattern so I still don’t quite understand the different ways of usingthese needles. Do I need to join anything before I start on the actual sole or do I just start knitting in the pattern you have displayed? Thank you once again for the pattern!

  14. Olive Wilson says:

    What does s1 1 mean, I am really confused, but thanks for the pattern I am really looking forward to getting started on it.

  15. Debbie says:

    bunny slippers

  16. rachel says:

    in the bunny ears do you slip knitwise or pearlwise or does it matter?

  17. Sarah says:

    Hello, I love the bunny slipper pattern. I was wondering if you could email me the bunny slipper pattern without all the pictures except send a picture of the bunny slippers. I would greatly apreciate this. I hope you are having a nice spring.

  18. Lobita says:

    Thank you. I just copied the pattern into MS Word. The Pictures came too. The women of my family are playful and will love these! Thanks again! Lobita

  19. Julie says:

    This is a really great pattern! Can this pattern be down sized for kids sizing? If so, where can I find the pattern?

  20. Gundi says:

    I too would like to have this patter in baby or toddler sizes, with the thrumming, however.

  21. Terry Hingst says:

    I Love the look of these. Going direct to the yarn shop from work this morning. Have not tried thrumming yet and am excited to try because the explination you provided makes it look so simple and easy. Read it in a few patterns before and passed because I didn’t understand the process. Thanks to you great decription I am ready to go. Appreciate the free pattern and instructions. Thank you so much.

  22. […] the stitches on the outside… since the fiber is full of so many random colors. I used the thrummed bunny slipper pattern, but minus the bunny stuff, and where the pattern started the ribbing rows, I just kept going, […]