Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

CRAFT Summer Camp
gnomebottlebowling_step13.jpg
By Jennifer Perkins
Bowling, garden gnomes, recycling – what’s not to love about this project? I have seen various incarnations of this lawn bowling game, but since it is summer, I thought it best to go with a gnome theme. Start slugging your favorite soda and mow your bowling lane, because the summer fun is about to begin!


GnomeBottleBowling_step1.jpg

Materials

10 empty 2-liter bottles

White spray paint
, formulated for plastic
Craft paint in assorted colors
Downloadable gnome template
, optional

Paint brushes

Gravel

Pencil

Glue

Funnel

Straight razor

Large ball

Clear top coat spray

Download PDF Download the Template PDF
Right click to save the PDF to your desktop. Directions on downloading PDFs.


Directions

gnomebottlebowling_step2.jpg
Step 1: Remove the labels from the empty bottles. Some of the labels came off easily, others needed a bit of help. I used a razor and running water to remove the glue and last bits of label.


gnomebottlebowling_step3.jpg
Step 2: Once your labels are removed, rinse your bottles well and set aside to dry completely.


gnomebottlebowling_step4.jpg
Step 3: Using a funnel, pour a bit of gravel into each bottle. The key is to add enough so they won’t blow over in the wind, but not so much that they’re too heavy to be knocked over by the ball. I just eyeballed the amount of gravel I used, but if you were so inclined, you could measure your gravel for even distribution among the ten bottle pins.


gnomebottlebowling_step5.jpg
Step 4: Take your gravel-filled bottles outside and set them on a blanket, tarp, or newspaper.


gnomebottlebowling_step6.jpg
Step 5: Paint your bottles white with spray paint designed for plastics. This may take a couple of coats. Be sure to allow your paint to dry between coats.


gnomebottlebowling_step7.jpg
Step 6: Once the white paint has dried, use a pencil to draw your gnome designs on the bottles. (You can download my design template above, or come up with your own!)
If you’re using my template, print it out and place a sheet of carbon paper on the bottle. Position the pattern over the carbon paper. Using a sharp pencil, trace the pattern onto the bottle. Do this for all ten bottles. The backside of the bottle will be very plain with just the gnome’s pants and top. If you are feeling arty, feel free to draw in more details.


gnomebottlebowling_step8.jpg
Step 7:The fun part is painting your gnomes. Thank goodness for my mother and her artistic abilities. She was able to draw several different gnomes for me, including a couple of cute lady gnomes. Use your favorite craft paint to fill in your line drawing.


gnomebottlebowling_step9.jpg
Step 8: No gnome lawn bowling set is complete without at least a couple of polka-dotted toadstool mushrooms. To get the perfect dots for your gnomes’ eyes and shrooms, dip the end of your paint brush into paint and apply. A pencil eraser also works great.


gnomebottlebowling_step10.jpg
Step 9: Once the paint has dried, put the lids back on the bottles. I recommend gluing them into place.

You might want to add a top coat of some sort, so your fancy paint job won’t crack and flake. I applied two coats of polyurethane sealer, allowing it to dry between coats.
gnomebottlebowling_step11.jpg
Step 10: Now that you have your ten pins painted and ready for action, you need your bowling ball. Choose a ball comparable to the size of a bowling ball, but much lighter in weight.


gnomebottlebowling_step12.jpg
Step 11: Line up your pins and get your ball. It was a little tricky for a 2 1/2 year-old to understand the concept of bowling – she wanted to throw the ball rather than roll it.


Step 12:The ball should roll and hit your bottles just like you were bowling. If you are playing with young children, you might set the pins up in an indoor hallway, so they have “bumpers” to help guide the ball to the pins. If you’re playing outdoors, you can set up some bumpers with bricks or flower bed edging.
gnomebottlebowling_step14.jpg
Step 13: Now cross your fingers and hope for a strike! Nothing says you have to stick to gnomes, of course. I got the idea from a ghost bowling set I made for HGTV. You could paint bunnies for Easter bowling, Santas for Christmas, or top 10 favorite presidents for an educational version.  


About the Author:
Author Jenniferperkins
Jennifer Perkins is the lady behind The Naughty Secretary Club blog and Etsy store. When she is not crafting, you can find her at various haunts around Austin, TX with her hubby and 2 kidlets.

DG


Related
blog comments powered by Disqus

Featured Products from the MakerShed

Follow

Get every new post delivered to your Inbox.

Join 25,545 other followers