Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Comments

  1. Sarah says:

    Rubbing alcohol also works to removes ink and permanent marker from surfaces like your kitchen counter! Just don’t use it on acrylic/plastic surfaces (obviously!) Because just like it removes acrylic paint, it will also eat away at the finish of acrylic surfaces!

  2. new orleans mom says:

    removing latex-based paint (acrylics) from a green cotton polo shirt with Pine Sol brand cleaner worked perfectly. i wet the shirt with water, then wrung it out, and poured a glop of the pine sol directly on the shirt and let it sit for a minute. i used a toothbrush to gently scrub and loosen the top layer, then more vigorously after most if it was removed. i then washed the shirt in warm water with some household rags, then again with regular laundry. absolutely no stain or discoloration. i believe this method works since pine sol is 10% pine oil, and something about its chemical polarity works to free the latex polymers in acrylics paints.

  3. SUE says:

    What can i add to the paints to get one coat coverage?

In the Maker Shed