Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

Header Homesweethome
How-To: Sew a Table Runner
By Betz White

tablerunner final1 How To: Sew a Table Runner
It’s a great time to think forward to the season ahead and to make your home feel welcoming. This is an easy way to make a table runner that reflects your style and protects your tabletop. The patchwork center panel allows you to use up scraps or put together a combination of your favorite prints. I used 4 prints from my organic canvas collection, “Family Cottage,” combined with an organic cotton canvas in brown for a nice autumnal feeling.

Materials

Solid color canvas approx. 5/8 yard
Print canvas or other fabrics approx. 3/4 yard total
2 1/2 yards of 1/2″-wide rickrack trim
Thread in coordinating color
Finished Measurements: Approximately 14″ wide X 41″ long

Directions

Tablerunner Step1
Step 1: Cut a rectangle out of the solid color canvas, measuring 42″ X 20″. Cut 7 rectangles measuring 6 1/2″ X 9″ out of the print canvas.
Tablerunner Step2
Step 2: With right sides together, seam the 9″ sides of 2 print rectangles together using a 1/4″ seam allowance. Continue, seaming all 7 rectangles together to create the center panel. Press the seam allowances open from the back of the work.
Tablerunner Step3
Step 3: Topstitch the seam allowances down, 1/8″ on either side of each seam.
Tablerunner Step4
Step 4: Place the rickrack trim along one long edge of the solid canvas rectangle, pinning to the right side of the fabric. Straight-stitch the rickrack 1/8″ away from the edge, down the full length of the rectangle. Repeat this process on the other edge of the rectangle.
Tablerunner Step5
Step 5: With right sides together, align the patchwork panel’s long edge with one long edge of the solid rectangle. Pin together, sandwiching the rickrack between the layers, then stitch 1/4″ from the edge. Repeat this process for the other edge of the panel and rectangle.
Tablerunner Step6
Step 6: Press the seam allowances towards the center panel, then turn the work right side out. Press the seam and rickrack again, from the right side.
Tablerunner Step7
Step 7: Topstitch along the seams created in Step 6, 1/8″ from either edge of the center panel. This step can be made easier using the free arm of your machine.
Tablerunner Step8
Step 8: Turn your work inside out again and center the panel so that there is 3″ of solid canvas bordering either side of the panel. Align and pin the short end of the runner and seam across the end with a 3/4″ seam allowance. Repeat for other end, leaving 5″ open for turning. Turn your work right side out and press the end seams and the long folded edges of the runner.
Tablerunner Step9
Step 9: Fold in and pin the seam allowances at the 5″ opening. Topstitch across the opening, then continue to topstitch the perimeter of the runner ⅛” from edge.
Tablerunner Final3
About the Author:
author betzwhite How To: Sew a Table Runner
Betz White is a designer, “green” crafter, and author of Warm Fuzzies: 30 Sweet Felted Projects and Sewing Green: 25 Projects Made with Recycled & Organic Materials. This summer Betz introduced her debut organic textile collection, “Family Cottage.” For more information, visit blog.betzwhite.com.


Related
blog comments powered by Disqus

Related Supplies at Maker Shed

Follow

Get every new post delivered to your Inbox.

Join 26,154 other followers