Project: Snowman Stocking With Pattern

Craft & Design Home Yarncraft

CZ_CelebrateTheSeason.gif
Snowman_Stocking_Finished1_high_res.jpg
By Haley Pierson-Cox
There are many ways to DIY your holiday celebration this year, but handmade stockings are one of my absolute favorites. When I see the time and care put into every single detail and stitch on a handmade stocking – no matter how old and worn it is – I just can’t help but feel the love behind it. For me, nothing brings forth more happy holiday memories than unpacking my childhood stocking, so I can’t think of a more perfect way to share joy of the season, year after year, with someone you love!

Materials

Printer and paper
Paper scissors
Scotch tape
Straight pins
1/2 yard thick gray felt
1/2 yard red flannel fabric
Craft felt,
1 sheet each of dark green, light green, orange, white, red, and brown
Paper hole punch
Fabric scissors
Embroidery needle
Embroidery floss,
dark green, light green, orange, white, red, black, brown, gray, and silver metallic
Sewing machine optional
Fine-point marker
Tailor’s chalk
5 small decorative buttons,
1/4″ in diameter
12 white seed beads
3 small black buttons,
1/2″ or 1/4″ in diameter
8″-long red decorative ribbon
Fabric clips,
optional

Download PDF Download the Stocking Pattern
Right click to save the PDF to your desktop. Directions on downloading PDFs.

Directions

Snowman_Stocking_Step1.jpg
Step 1: Download the pattern PDF (above), then print and cut out the pieces. Assemble the stocking pattern pieces with scotch tape.
Snowman_Stocking_Step2.jpg
Step 2: Using straight pins to attach the pattern pieces to the felt, cut out the following:
2 gray felt stocking pieces
2 red flannel stocking pieces
2 dark green trees
1 light green tree
3 brown tree stumps
1 piece of each of the three snowman circles in white
1 orange carrot nose
Snowman_Stocking_Step3.jpg
Step 3: Using the paper hole punch, cut out 11 red dots. You may need to use fabric or embroidery scissors to complete the cuts if your punch isn’t very sharp.
Step 4: Select one of the gray felt stocking pieces for the front, making sure the toe is pointed toward the right when it’s facing you. Using straight pins, secure the first (dark green) tree and tree stump in place. Make sure the top of the tree stump is tucked under the tree.
Snowman_Stocking_Step5.jpg
Step 5: With 2 strands of dark green embroidery floss (each length of embroidery floss is made up of 6 individual strands), straight stitch around the edge of the tree with small, even stitches. Do the same straight stitch around the edges of the tree stump.
Snowman_Stocking_Step6.jpg
Step 6: Pin the second (light green) tree and stump in place and straight stitch around the edges of both using the same method that you did for the first tree.
Snowman_Stocking_Step7a.jpg
Snowman_Stocking_Step7b.jpg
Step 7: Using a split stitch with 3 strands of gray embroidery floss, zigzag a line of stitches across the tree from top to bottom. If you have trouble sewing in a straight line, you can lightly mark the path with tailor’s chalk before starting. This line will be the cord for the Christmas lights on the tree.
Snowman_Stocking_Step8c.jpg
Step 8: Pin the third (dark green) tree and stump in place and straight stitch around both like you did in Steps 5 and 6.
Snowman_Stocking_Step9a.jpg
Snowman_Stocking_Step9b.jpg
Step 9: Place the red dots on the lines that you stitched in Step 7 and loosely baste them in place using 1 strand of white embroidery floss. These stitches are only intended to hold the dots in place while you are sewing around them. The white floss will be removed once the dots are secured, so don’t knot the ends. I’ve included both a front and back view to give you a better idea of the basting method that I used.
Snowman_Stocking_Step10.jpg
Step 10: Straight stitch around the edge of each dot. Once the dots are secured, pull on the white embroidery floss to remove the basting stitch.
Snowman_Stocking_Step11.jpg
Step 11: Pin the white circles for the snowman in place and straight stitch around one piece at a time, layering each piece on top of the one before it.
Snowman_Stocking_Step12.jpg
Step 12: Using 1 strand of white embroidery floss, place the orange nose on the snowman and baste it in place. Use the face printed on the snowman pattern to make sure the nose is in the right spot. Using 2 strands of orange embroidery floss, straight stitch around the edge of the nose.
Snowman_Stocking_Step13.jpg
Step 13: Open the eye and mouth holes on the face pattern with a straight pin, then use a fine point marker to mark the face onto the felt though the holes that you just made.
Snowman_Stocking_Step14.jpg
Step 14: Using 3 strands of black embroidery floss, make French knots for the eyes and mouth. To make the eyes bigger, you can wrap the floss around the needle a few extra times.
Snowman_Stocking_Step15.jpg
Step 15: Add arms to the snowman by split stitching with 6 strands of brown embroidery floss. Again, feel free to sketch the arms with tailor’s chalk before you sew.
Snowman_Stocking_Step16.jpg
Step 16: Decorate the trees and dress the snowman.
First tree: Add tinsel to the tree by backstitching in a zigzag pattern with 3 strands of silver metallic embroidery floss.
Second tree: Sew the decorative colored buttons onto the second tree with 2 strands of green embroidery floss to make ornaments.
Third tree: Evenly distribute the white seed beads across the tree and sew them in place with two strands of white embroidery floss.
Snowman: Stitch three black buttons onto the snowman with two strands of black embroidery floss.
Snowman_Stocking_Step17.jpg
Step 17: With right sides facing, pin a red flannel stocking piece to both gray stocking pieces. On the front piece, the red flannel should cover the side of the gray felt that contains the trees and snowman.
Snowman_Stocking_Step18.jpg
Step 18: Using a 1/4″ seam allowance (hand stitching is okay too), sew across the top of each flannel and felt pair.
Snowman_Stocking_Step19.jpg
Step 19: On both side pieces of the stocking, fold the flannel over the top of the felt stocking piece so that wrong sides are facing and the seam you just sewed is now between the two pieces. Once the felt and flannel are lined up on both, put the two sides of the stocking together with flannel sides facing and pin in place or hold with fabric clips.
Snowman_Stocking_Step20.jpg
Step 20: Using evenly spaced stitches, whipstitch the two stocking sides together around the edge using 2 strands of red embroidery floss.
Snowman_Stocking_Step21.jpg
Step 21: Finish the stocking by hand sewing the decorative ribbon loop into the left side seam and reinforcing the stitches at the top edges of the stocking with a few extra whipstitches.
Snowman_Stocking_Finished_2.jpg
About the Author:
Haley.jpg
Haley Pierson-Cox is a Brooklyn-based craft writer who loves granny glasses and loathes extraneous apostrophes. She blogs about crafts, cats, domestic bliss, and DIY goodness at The Zen of Making.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK