This Tabletop Has Over 5000 Pennies Embedded In It

Workshop
This Tabletop Has Over 5000 Pennies Embedded In It

FXBKaG1

An Imgur user going by the name of CallofTheGame has made an extravagant table by gluing approximately 5,218 copper pennies to a door.

The process was relatively simple and started with the purchase of a 80″ x 32″ solid core birch door that was stained with a Continental shade that beautiful matched the copper color of the thousands of tiny pennies. Then the Lincoln-faced coins were sorted by levels of brightness to produce a spectacular checkered pattern which almost looks 3-dimensional when looked at at the right angle.

6A7eyDy

Once the edges were reached, sides of the connecting pennies were cut off using a pair of handheld tin (aka aviation) snips.

Next, a two-stage epoxy which is the same material that bars use on their counters was added to the top. This was the most nerve racking part because a slight mistake could mess up the whole thing. After the included resin and the activator was mixed, the glaze was spread across the penny covered table and a hairdryer was used to get out any bubbles that surfaces.

Here are a few of the process pictures. For the rest of the pictures and the explanations of what exactly is being done, you’ll have to go to the Imgur gallery for this project.

Interestingly enough, one penny was turned upside down to drive any perfectionist friends guessing where it could be.

The result is an amazing work of craftsmanship that would fit well in any home. Now, see if you can find that one turned up penny. Let us know in the comments if you discover where it is!

 

0 thoughts on “This Tabletop Has Over 5000 Pennies Embedded In It

  1. Jim Campbell says:

    I can almost fancy a “Qbert” made out of dimes hopping around on that.

  2. Tom says:

    Can you recommend a good custom wearables source eg., for printing images on fabric?

  3. Michael Pollack says:

    how much does it weigh? I calculate the pennies weigh just under 30 pounds, the door weighs in at about 65 pounds plus epoxy and legs. Can it be moved easily?

Discuss this article with the rest of the community on our Discord server!
Tagged

I'm a virtual reality, wearables, and technology art journalist who focuses on emerging trends in the maker, hacker, and inventor cultures. I like to travel around from place to place researching what is being made.

View more articles by Matt Terndrup

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK