DIY iPhone Stylus

Computers & Mobile Craft & Design Technology

With such an elegant interface that begs to be touched, you might wonder why anyone would bother using a stylus with an iPhone, but there are times when such an implement comes in handy. When you find yourself in such a situation don’t bother grabbing your old PDA stylus. You’ll need something that works with the iPhone’s capacitive touch screen like this handy DIY iPhone/iPod touch stylus pen.

24 thoughts on “DIY iPhone Stylus

  1. hurf durf says:

    Scraping your iphone screen, or scraping the bottom of the barrel?

    1. Adam Flaherty says:

      At least spike took the time to test the hack out before leaving a comment. I’ll assume the scope of your analysis is directly proportional to the degree with which you leave pithy aphorisms.

  2. spike says:

    not quite any pen either. it has o be conductive, so a biro wont do it (just tested it with a coin and my wacom stylus) – works with the finger but not when you just push the coin around.

    this is a pretty useless hack.

    1. Adam Flaherty says:

      Thanks for taking the time to test this hack. I concur with your findings. I tested it using the blunt end of an x-acto gripster. It wouldn’t work at first because the implement is insulated by a thin rubber grip. Touch the conductive tip at the opposite end of the stylus point and it works.

      My girlfriend has commercial iPhone stylus. It’s small like a PDA stylus and has a conductive foam tip. When she first got it at a trade show I questioned the practicality of it myself. That’s because we live in California where the weather usually isn’t bone-chilling during the winter months. Apparently people tend to wear gloves when it gets really cold out, and for some it can be a real pain-in-the-ass to have to take the gloves off just to use the phone.

      I agree with you that you can’t use just any pen as the video suggests. It has to be conductive. However I don’t agree with you that it’s a useless hack.

  3. selfSilent says:

    looks good, seems to be well thought out and works well. A hell of a lot better than the rubbish rubber tipped pens they sell on Ebay.
    The problem is, even with a screen protector I just wouldn’t be happy using something higher on the mohs scale than the screen itself.

  4. Infostyx says:

    I was excited to try this hack since I had the right sized button fasteners hiding out at the bottom of my closet. But I followed the directions to a T, and it didn’t work, not even a little bit. I was hoping to use this for the brushes app since my fingers are clumsy but I guess its back to the drawing board (or not, har de har).

    1. Adam Flaherty says:

      If you followed the video ‘to a T’ chances are you could wind up with a non-functioning stylus. The presenter says you can use any pen, but further testing shows (as noted in previous comments) that you need to use a pen that is conductive and make sure there is a connection between the pen and the snap tip. And now that I think about it you’d have to make contact with the pen as well in order for this to work. I have tested the need for conductivity using an x-acto gripster stylus. Hope this helps.

  5. Mozbius says:

    I gave it a little tought about how this home made stylus and figured that using AA battery (used the bottom) could work. So I gave this idea a try and VOILA ! Energizer mini stylus! lol!

    Admittedly it’s far from perfect but it gives food for thoughts!


  6. mkp says:

    Another necessity: use the right size of snap. Snaps come in a number of sizes, and the small size (size 0, about 1/4 inch across) does not work. The next larger size (size 1, about 3/8 inches across) does work.

  7. Anonymous says:

    step 1: soak sponge in salt
    step 2: get metal x-acto knife and remove blade and blade holder
    step 3: take sponge and jam into end of x-acto knife
    step 4: draw

  8. Catherine Alexander says:

    Clever. Thanks a lot, since I’ve been desperate to find something that works. I much prefer a stylus to a fingertip. I would be curious to know, however, if this device scratches the screen.

  9. Chami says:

    I like this very much.  It works well and hasn’t scratched the screen protector that came with the Otter case for our Iphone.  Thank you.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

I make cool stuff and write about other people making cool stuff on If you have something you think I should see, send me a tip.

View more articles by Adam Flaherty


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).