MAKE Flickr photo pool member Djbones writes – “I’m building the kite aerial photography timer circuit from Make magazine vol 2, and this is the prototype. I changed the circuit a bit from the magazine, because sometimes just keeping the kite up for more than a minute is a challenge. I used a 2 ohm M trimpot in series with a 680K resistor to adjust the timer interval from between 20 and 40 seconds.” Link.
Single-Use Digicam for Kite Aerial Photography by Limor Fried in DIY: Imaging. Subscribers can view the article here.
Add you projects to the MAKE Flickr photo pool here!
ADVERTISEMENT
