By Andrew Salomone
In Hans Holbein’s famously inexplicable painting, “The Ambassadors,” a large anamorphic skull appears to lie across the floor at the feet of two dandified renaissance gentlemen. The skull appears in correct perspective only when the painting is seen from an acute angle looking diagonally down from the left-hand side of the painting (or diagonally up from the lower right hand corner). I decided to make a latch hooked anamorphic skull rug in order to display the skull image from the painting on the floor in real life, and to see if the image would change in and out of correct perspective as the viewer walks past it (it does!). You can follow the same process I used to make this project to turn the image of your choice into a photorealistic latch hook rug.
You can also see this tutorial on Make: Projects.
Materials
Yarn several different colors
Blank Latch Hook Rug Canvas
Latch Hook Tool
Scissors
Photoshop or other photo editing program
Printer
Yarn Needle or Iron-On Fabric Tape
Directions
Step 1: Choose a digital image that you want to make into a latch hooked rug, then pixelate the image to the resolution that you want your rug to be. If you are using photoshop go to “Filter” and scroll down to “Pixelate” and then select “Mosaic.” The more pixels in the image, the lager the rug will be.
Step 2: If you are using photoshop, go to “Image” and scroll down to “Adjustments” and select “Posterize.” Manipulate your image until you find the combination of colors that you like. If you already have colors that you wish to use in your rug, then you can manipulate the image by changing the contrast and color saturation to try and match your image to the colors you have. This image will be the pattern that you use to make your rug.
Step 3: Count the number of pixels along the length and width of your image. Make sure that your latch hook canvas has more rows across its length and width than the number of pixels along the length and width of your image.
Step 4: Print out your pattern and look for yarns that match the colors in your pattern. You can get rug yarn, but just about any heavier yarn will work. (I used a few different kinds of yarn in my project and they all worked fine.)
Step 5: Cut your yarn into 3-5 inch pieces.
Step 6: Wrap a piece of yarn around your latch hook tool.
Step 7: Weave the tool under one of the rows on the rug canvas.
Then pull the yarn over the row into the hook.
Step 8: As you start to pull the latch hook tool back out of the canvas the latch will close over the yarn and keep the hook from catching. Keep light tension on the two ends of the yarn until it is fully pulled through the canvas. You may need to give the yarn a little tug to tighten up the knot and keep it from coming out.
Step 9: Follow the pattern and hook each color of yarn to the canvas according to its corresponding color in the pattern. It helps to go row by row crossing each row out on the pattern as you finish it.
Step 10: When you have your pattern all latch hooked onto your canvas, you can cut the rest of the canvas off around your latch hooking, leaving about a 2 inch margin. The excess canvas can be folded under the rug and stitched down or secured by iron-on fabric tape.
Step 11: Put your rug on the floor or the wall or wherever you want and enjoy!
About the Author:
Andrew Salomone makes artwork about the absurd ways that ideas are communicated through popular culture. He is currently teaching a course on contemporary art and the internet at Parsons The New School for Design.
ADVERTISEMENT
