What’s inside: Nikon D3 cutaway

Photography & Video
What’s inside: Nikon D3 cutaway


Like many Makers, I got my start taking apart everything I could lay my hands on. Sometimes, however, it takes a good old fashioned cutaway to truly appreciate the complexity of a well engineered device. How the heck do they do this? Can I borrow the tool they used?

More photos at Tokyobling. via notcot

28 thoughts on “What’s inside: Nikon D3 cutaway

  1. ins0mniac says:

    the very first comment in that blog provides the update.. It’s not a D3, it is just a dismantled Nikon Coolpix S60.

  2. tacticus says:

    The commend about the s60 is linking to another article ins0mniac

  3. The Oracle says:

    I can’t pick out what it is based on the image, especially since I don’t know cheap cameras. But a D3 has a totally different shape and does not say Nikon along the left side.

    The Nikon D3 is a $5000 camera body. I would hope it’s not a D3, even broken. It’s also a thing of beauty, if you’ve never handled one you really should.

  4. The Oracle says:

    I looked up the Nikon product page for the D3: http://imaging.nikon.com/products/imaging/lineup/digitalcamera/slr/d3/index.htm

    You can easily tell the cut camera does not look remotely like the D3.

    The coolpix S60 is a compact point and shoot, so it’s not an S60 either.

    I’m very familiar with Nikon’s bodies, I’ve owned about 6 over the years and it doesn’t look like a Nikon to me. I found a page with a lot of Nikon images here http://www.pbase.com/cameras/nikon but I don’t see anything like this camera on there either.

  5. Silverman says:

    It’s a D3 on its side, gentlemen.

  6. The Oracle says:

    @Silverman – You’re right. Thanks for clearing it up. :) I was wondering why the “left grip” had what looked like a prism in it and why the “side” of the lens have the printing that should be on the bottom. But I still didn’t make the connection.

    It’s an impressive shot, but I cringe to see a D3 like that.

    I’ll go to bed before I embarrass myself any more tonight.

  7. Robert says:

    I took that picture myself during the Eco Products fair in Tokyo in December last year. It is Nikon D3 sliced in half (probably with a a water jet or a laser cutter, I imagine that the lens elements were taken out and cut seperately as you wouldn’t ever use the same machine to cut glass and metal the same way). The reason you might not see it is because it looks like a horisontal cut while in reality it is a vertical cut.

    The mentioning of a Coolpix S60 is just to compare the lenses of the two different pictures.

    I haven’t yet contacted Nikon about it, since I didn’t imagine that this blog post would get noticed at all. But I am honored to be picked up on the MAKEZINE blog. It is my favorite blog!

  8. Tyson says:

    The d3 is an amazing camera. This one was amazing until somebody ruthlessly chopped it in half.

  9. Anonymous says:

    it’s an air brush painting. Skill full and often done.

  10. magicmulder says:

    … and the lens is a Nikon 14-24mm f/2.8 G.

  11. Don Hersey says:

    Nah, these cutaways are made with a special kind of saw. The blade is made with a soft metal, which forms the matrix for embedded carborundum particles. Just like a tile saw. The trick is to saw very slowly, more slowly and smoothly than a human can, using a stepper (or like) motor and a slide.

  12. The Oracle says:

    How do you recognize the lense? I just knew it wasn’t a VR lense because of the print on the bottom.

    They should have cut a Canon in half, it wouldn’t have made the camera any worse. (Sorry, had to say it).

  13. pd says:

    My company has made such cutaways. It’s not as simple or cool as you’d imagine. First a line is marked for cutting, then the product is taken apart and rough cut, usually with a bandsaw or mill–glass would take something different, obviously. Then the parts are sanded up to the line and sometimes polished or painted. Then they are reassembled and mounted to a display board.

  14. Cutaway Creation says:

    Fantastic cutaway display model.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

John Edgar Park likes to make things and tell people about it. He builds project for Adafruit Industries. You can find him at jpixl.net and twitter/IG @johnedgarpark

View more articles by John Edgar Park


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).