3D Printable Death Star Shaped Speaker Enclosures

3D Printing & Imaging Home Music

deathStarSpeaks

Rich Olson at nothinglabs has released a very cool parametric speaker enclosure on to Thingaverse. You can load up the page, set the right specifications for the driver of your choice, and print a Death Star shaped enclosure of your very own. These look absolutely fantastic, and according to Rich, sound fantastic if you find the right driver for it.

To make your own, you’ll need to:

  1. Find the driver you want, Rich recommends the Vifa 2″ full range woofer 
  2. calculate the bass port size with this tool
  3. open the customizeable file on thingiverse.com and plug in the right numbers
  4. Print and assemble!

IMG_20141211_203241-nopm-

Tagged

I get ridiculously excited seeing people make things. I just want to revel in the creativity I see in makers. My favorite thing in the world is sharing a maker's story. You can find me on twitter at @calebkraft

View more articles by Caleb Kraft
Send this to a friend
FEEDBACK