Tennis ball launcher prototype

Fun & Games

Seth Robinson writes:

I enjoy throwing the ball for my Rat Terrier, Maple, every afternoon, but I injured my shoulder a while back and some days it can be of painful. Naturally, as a maker I wondered if there was a “better” way to throw a tennis ball. I’d seen similar projects before, notably the popular YouTube video with the too-cute daschund, and reckoned I should give it a try.

This catapult-style tennis ball launcher is my first attempt. I’m sure there’s an engineering principle that covers this kind of machine, but I am uninformed, so bear with me. The shredder motor winds the elastic band until it gains enough potential energy to start the arm moving. Once the arm starts, it accelerates quickly and slams into the forward stop, throwing the ball. I have fitted the arm with a second, weaker elastic band which tensions as the arm reaches the forward stop. When the direction of the motor is reversed, the tension is released from the main elastic band, allowing the second band to return the arm to its resting position.

Except for the wood frame, the launcher is made of scavenged parts from:

  • dead paper shredder
  • old SCSI scanner
  • Theraband that my Physical Therapist gave me (yep, shoulder)
  • slingshot-style tennis ball launcher
  • Chuckit tennis ball thrower
  • 55 gallon plastic barrel
  • cardboard box

I threw the whole thing together in about 2 hours and was surprised when it worked on the first try. The ball currently travels about 30 feet, which is far from ideal as my goal is 200 feet. Relays are on the way for the motor control and I have a Make Controller sitting here waiting for firmware.

6 thoughts on “Tennis ball launcher prototype

  1. Spokehedz says:

    modified-trebuchet/catapult Tennis ball launchers are fine and all… but I think that we can make a low-powered (under 50PSI) modified spud-gun that could do much better.

    basically make a tennisball version of the straw-cannon that the Mythbusters made.

    A small opening in the back of the barrel would let the ball be inserted. Then a sliding section of pipe would close over it. From then on out, it is a simple X/Y for the direction of the cannon. Setup a portable air compressor (12v for the car would work) and after a set period of time (or PSI) trigger the sprinkler valve.

    It really is too bad I don’t have a dog that likes to fetch… I even have the spudgun… Oh well.

  2. Maker Dino says:

    Nice job!
    Here’s one I made… maybe you’ll get some ideas from it

    Here’s a few pictures and the schematic:


  3. Monkeybrad says:

    Great idea and a cool way to scratch an itch. Now if you can only train your dog to return the ball to the launcher and trip the cycle itself.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. And he has a new best-of writing collection and “lazy man’s memoir,” called Borg Like Me.

View more articles by Gareth Branwyn