HOW TO – Hot rodding a power drill battery

HOW TO – Hot rodding a power drill battery

Archer6817j writes –

“So, your power drill battery dies. What now? Fork over 85 bucks for a new one? I don’t think so. After searching high and low on the internet for a good price for a replacment battery I found the retail for my Black & Decker 14.4V to range from 35-85 dollars. Riiiight. Time to make your own!”Link.


  • Homemade high speed drill – Link.
  • Selecting your next cordless drill – Link.
  • Drill chuck food chain – Link.
  • HOW TO – Speed stabilizer for Dremel drill – Link.
  • HOW TO – Make a silent drill – Link.

4 thoughts on “HOW TO – Hot rodding a power drill battery

  1. -soapy- says:

    HOW TO – Make a silent drill – Link.

    is broken.

  2. Russtang says:

    Weird, I did almost the exact same thing last weekend for my Black and Decker drill :0. Refreshed both my dead nicad packs.

    I started with pre-made drill packs from harbor freight (item 90712). Disassembled them and had to rewire 3 or 4 cells to fit the same form-factor. I just cut the battery straps in the middle and re-soldered them in their new locations. Re-used the B&D case and connector.

    The replacements are 1000mAh nicad cells, and are lighter than the original so I assume they are smaller capacity (forgot to check the bottom of the B&D firestorm pack). But for $12.50 for 2 packs (on sale), I couldn’t go wrong!


Comments are closed.

Discuss this article with the rest of the community on our Discord server!

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).