DIY PVC Magnetometer

Science Technology
DIY PVC Magnetometer

I love it when people use humble PVC as a project enclosure. In this case, Alex Avtanski of San Jose, CA, built this DIY Magnetometer to detect and measure magnetic storms.

The activity of the Sun varies on a cycle with a period of approximately 11 years. Periods of low solar activity are followed by a few years of sharply increased number of solar spots, flares, and coronal mass ejections (CMEs), disrupting Earth’s magnetic field and causing magnetic storms. With the next Solar cycle maximum approaching I wanted to get on the fun too, so I set to build my own device for detecting and recording those magnetic storms, a.k.a. a magnetometer.
My magnetometer is of a torsion design. Torsion magnetometers work as follows: A magnet, attached to a mirror, is suspended from a thread. A laser beam is reflected from the mirror and falls on a detector. Changes in the Earth’s magnetic field turn the magnet and the attached mirror, twisting the torsion thread. The reflected beam changes its position on the sensor, the changes are recorded and plotted on a chart.

2 thoughts on “DIY PVC Magnetometer

  1. texmex says:

    doesn’t the laser have to be “quiet”? and if so isn’t pvc too light to stay quiet?…or is quietness not needed?…..thanks texmex

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

My interests include writing, electronics, RPGs, scifi, hackers & hackerspaces, 3D printing, building sets & toys. @johnbaichtal

View more articles by John Baichtal


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).