ATmega8 Development board

ATmega8 Development board

This looks like a nice developmental board for programming an ATmega8. The website has some sample programs and the Eagle files so you can make your own. [Thanks Florin]

I made the board using my photo etching technique, and as you can see the results are great. The dev board has 17 I/O lines that are connected to a 17 pin header. On the board there is a 2 color LED tied to PortC pin 1 and 2. On PortC pin 0 there is a PNP transistor that controls the output for a buzzer.

Read more about making an ATmega8 Development board

Read more about Atmel AVR ATmega8 video overlay project

2 thoughts on “ATmega8 Development board

  1. says:

    Cool board.

    BTW, if anyone’s looking for an etch-it-yourself board with built-in serial communication and compatibility with Arduino shields, check out the Arduino Severino (designed by Adilson Akashi). It’s bigger and more complicated than this one, but includes a DB9 connector, power jack, and crystal.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).