Daniel Pon’s “Paradox Mouse” is an amazing piece of macabre retro-tech art. Too bad those 9mm rounds he used in its construction have already been fired. Where’s the excitement in that? Really an impressive piece of work. While you’re on his site, check out his equally impressive “Neo Victorian” monitor and keyboard.
After completing my custom keyboard, I was constantly annoyed with seeing my ugly plastic mouse sitting next to it, so I knew a new project was inevitable. I decided to make a custom matching mouse! At first I felt this project was beyond my abilities, since I had to make actual moving and working parts, but after hours of staring at a dissembled mouse and my boxes and jars of random found objects, I developed a plan of attack. The mouse I started with was a generic 5 button mouse with scroll wheel. The two main left/right buttons were the largest obstacles for I couldn’t find anything that would both look and function well. My first though was to use the two sides of a bottom jawbone of some rodent I had lying around, but they ended up being too small and fragile for constant use. I then decided I will just carve some pieces out of wood. After this, I made a mount using brass tubing and brass I-beam shaped pieces. To match the keyboard, I decided to add vintage typewriter keys to each of the finger points on the main 4 buttons of this mouse. I used Alchemy symbols to replace the original letters in the keys. These symbols may or may not have been chosen for a specific significance in this project.
ADVERTISEMENT
