SeeMeCNC’s Hacker H2 kit isn’t for the faint of heart, but it will satisfy users who like getting their hands dirty customizing their printer.
The kit ships with two different length sets of delta arms: Orion (178mm) and Rostock (290mm). By swapping the arms, you can get either taller or wider prints. A simple G-code macro will update the necessary EEPROM settings for the set of arms in use.
The H2 knocked out our test probes with ease. However, too little cooling at the nozzle exit resulted in poor print performance on features like overhangs. Print quality was noticeably superior with Cura over MatterControl. Though novice users may want to look elsewhere, the H2 offers a 3D printer modder’s dream at a reasonable price.
|Price as Tested:||$549|
|Build Volume:||175mm (dia.)×200mm (tall) OR 140mm (dia.)×295mm (tall)|
|Bed Style:||Non-heated glass|
|Temp Control:||Yes, extruder (280°C max)|
|Print Untethered:||Yes, SD card|
|Onboard Controls:||Yes, scroll knob and LCD|
|Host/Slicer Software:||MatterControl (vendor recommended), Cura|
|OS:||Mac, Windows, Linux|
|Open Software:||Yes, MatterControl is BSD-2-Clause, Cura is AGPLv3|
|Open Hardware:||Yes, GNU GPL 3.0|
Send this to a friend