MKSF7-2.jpg

You remember Simon, right? This through-hole soldering Simon kit will bring back memories as you try to match the colored patterns. Plus, its ATmega168 microcontroller is re-programmable, so you can come up with your own games using the Arduino IDE and an FTDI board.

MKSF7-4.jpg

Features

  • 1x ATmega168 – pre-programmed with Simon firmware
  • 1x Buzzer
  • 2x 0.1μF Cap
  • 1x 10K Resistor
  • 4x LEDs (blue, yellow, red, green)
  • 2x Slide Switch
  • 4x Battery Clips
  • 2x AA Batteries
  • 1x Button pad
  • 1x Bezel
  • 4x Standoffs and screws
  • 1x Assembly instructions
  • A soldering iron, solder and wire cutters are the bare minimum tools required.

Simon kit in the Maker Shed