You remember Simon, right? This through-hole soldering Simon kit will bring back memories as you try to match the colored patterns. Plus, its ATmega168 microcontroller is re-programmable, so you can come up with your own games using the Arduino IDE and an FTDI board.
Features
- 1x ATmega168 – pre-programmed with Simon firmware
- 1x Buzzer
- 2x 0.1μF Cap
- 1x 10K Resistor
- 4x LEDs (blue, yellow, red, green)
- 2x Slide Switch
- 4x Battery Clips
- 2x AA Batteries
- 1x Button pad
- 1x Bezel
- 4x Standoffs and screws
- 1x Assembly instructions
- A soldering iron, solder and wire cutters are the bare minimum tools required.
Simon kit in the Maker Shed
