Find all your DIY electronics in the MakerShed. 3D Printing, Kits, Arduino, Raspberry Pi, Books & more!

SIP06-PrintrbotSimple

Printrbot / printrbot.com / Available in the Maker Shed

Price as tested $399 assembled
Print volume 3.9″×3.9″×3.9″
Heated bed? No
Print materials PLA
OS supported Linux, Mac, Windows
Print untethered? With SD card, initiated from computer
Open-source hardware? Yes, noncommercial
Open-source software? Yes
Printer control software Repetier-Host / Printrun
Slicing software Slic3r

It’s easy to fall in love with the Printrbot Simple, one of the smallest, cheapest, most straightforward 3D printers available. For an entry-level maker, educator on a budget, student learner, or weekend warrior, this is a perfect machine in terms of cost, ease of use, and results. While most manufacturers try to cram new features and bloat into their products, Printrbot has stripped away as much as possible in the Simple.

The build area of the Simple is roughly 4 inches square. It’s a perfect size for students of 3D printing everywhere, offering plenty of volume for making pint-sized components, action figures, and more, with enough constraint to keep it challenging.

3DPrintingSIP Widget Final PrintrBot Simple

$399 Assembled, With Open Design Files

We tested the assembled model ($399), but the Simple is also available as a $299 kit with all the parts you need for a complete build, or for the maker with access to a laser cutter, a $259 internal components-only option. The really cool part is that all their designs are shared online using a Creative Commons Attribution-Noncommercial ShareAlike license. This means you can produce your own Printrbots from scratch — you just can’t sell them.

Setting up the Simple and getting your first print off it is pretty straightforward using the included printed manual or PDF from their website. It includes screen shots for both Mac and Windows operating systems. For the beginner, the troubleshooting guide is a bit lacking — more documentation explaining how to adjust the Z height, level the bed, and load filament would be useful.

Prints Untethered (But Needs Documentation)

We were really excited to learn that the Simple could print from an SD card, rather than requiring a laptop be tied up when doing an all-day print. However the lack of documentation from Printrbot on this matter was problematic, as was the way the Repetier-Host software seemed to handle our attempts (a bug with the application, not with Printrbot’s hardware). So we wrote our own instructions for new users on how to use the SD card for untethered printing.

Printing Untethered: The Missing Chapter

While the Repetier-Host software has built-in SD card support, it’s slow and buggy; don’t use it to transfer your G-code. Instead, unchain your computer with the following steps.

  • Use your laptop’s SD slot or a card reader to copy the G-code directly from the computer to the card.
  • Install the SD card into the printer, and connect the laptop.
  • Select the file to print in Repetier from the SD card manager, and initiate printing.
  • Click Disconnect in Repetier and unplug the USB cable. The printer will continue to run.
  • To resume control of your bot, simply plug the laptop in with USB and click Connect.

Other notes for first-timers: When the Simple starts a print, there’s a fair amount of clicking and whirring, none of which seems to suggest anything is wrong. This could possibly be fixed with a C-clamp mounted to the back for extra weight or by securing it in a bench vise if you want to lose portability. There does seem to be a bit of droop on the extruder, too — be aware of this when leveling the build platform, and compensate if needed.
The bed is unheated and will only support PLA or nylon filaments. Early versions of the Simple did not come with an extruder fan or end stops; this has been corrected, and all printers now ship with these parts as standard.

We really like the Simple because of its lightweight platform and small footprint, making it easy to travel with to class, demonstrations, and meetups.

SIP06-PrinrbotSimple-robots

Good Prints, a Little on the Slow Side

The biggest drawback to the Simple has to be the slow speed at which it operates, but nonetheless with pleasing results. It did a pretty good job reproducing the smaller details of the MAKE robot, while a half-scale, 0.2mm layer height Zombie Hunter Head took about 2 to 2.5 hours with some really impressive results.

The Simple definitely kept up with the rest of the pack in terms of print quality and detail.

Conclusion

During testing, the MAKE team raved about this printer nonstop. (I liked it so much I bought one online before I left Sebastopol.) For an educator, the Simple is perfect. Many students can afford to buy this kit themselves, solving the issue of capacity and hands-on learning in the classroom in one fell swoop. Building and operating a 3D printer are valuable skills for anybody looking to stay competitive in tomorrow’s world, and the Printrbot Simple is a great place to start.

Primo features

  • Small, affordable, and light (it can fit entirely on the bed of some of the larger printers we tested).
  • Open-source design files let you laser-cut your own frame.

Who’s It For?

  • Makers on a budget
  • Students
  • Educators
  • Weekend Warriors

Pro Tips

  • If you’re assembling it yourself, pay special attention to getting the fishing line tight on the y-axis, and then keep an eye on it to avoid slippage when printing.
  • When leveling the build plate, check for the extruder drooping slightly at the front — there’s a lot of weight on the gantry and it can lean down a bit.

Ultimate Guide to 3D Printing 2014This review first appeared in MAKE’s Ultimate Guide to 3D Printing 2014, page 60. Check out the full issue for more!

 

Tom Burtonwood

Tom Burtonwood

Tom Burtonwood is an artist, educator and entrepreneur based in Chicago, IL. Burtonwood co-founded Mimesis, LLC a product development company focused on 3D scanning and digital fabrication. He teaches at The School of the Art Institute of Chicago and Columbia College.

Find Tom on Twitter: @tburtonwood and on Instagram: @tomburtonwood


Related
blog comments powered by Disqus
Follow

Get every new post delivered to your Inbox.

Join 26,143 other followers