Review: Type A Machines Series 1

3D Printing & Imaging Workshop
Review: Type A Machines Series 1

SIP06-TYPE-A_Series1_3851

Type A Machines / typeamachines.com

Price as tested $2,295 (expected, 2014 model still in beta)
Print volume 12″×12″×12″
Heated bed? No
Print materials PLA, nylon, soft PLA, PET
OS supported Linux, Mac, Windows
Print untethered? Yes, wi-fi and Octoprint
Onboard control interface? No
Open-source hardware? Some restrictions
Open-source software? Yes
Printer control software Octoprint
Slicing software KISSlicer

Type A Machines was born out of the famous San Francisco hackerspace Noisebridge. Andrew Rutter started the company in December 2011 and launched the Series 1 printer the following spring. Type A describes its philosophy as “accessible source”: They will hold patents, but make all hardware specifications fully and publicly available for user modification (with commercial restrictions).

Most of our tests ran on Type A’s 2013 model Series 1. A new 2014 model is expected in October, and the 2013 model will no longer be available; we also tested a beta prototype of the 2014 machine, but had only a few hours with it. This review is split into two sections describing both models.

Out with the Old: 2013

The 2013 Series 1 ($1,695) is a significant upgrade from the 2012 model we rated “Best in Class” last year. It includes redesigned mechanics, an improved version of Type A’s Winchester extruder, a custom machined pinchwheel, better motors, and a four-point build platform leveling system. The 2013 Series 1 also ships with a handy Top Hat spool-management system, so you can queue up a rainbow of spools and take advantage of the Winchester’s filament quick-change lever.

Our unit’s bed was out-of-level on delivery, so we releveled and recalibrated following the manual. We had little or no adhesion issues with this printer for the whole weekend, which was unusual among those we tested. The factory-supplied KISSlicer profiles worked well with very little adjustment. A slider controls the print speed, from Fast (90mm/s) to Precise (30mm/s). We found that pushing the speed past 65mm/s caused registration and surface-finish problems.

We used only one spool, so we didn’t test the Top Hat spindle for swapping. The spool occasionally unwound during homing, but it didn’t cause issues during printing. We tested using the bundled 1.75mm red PLA. After our configuration-sequence print, we went immediately for the Ultra Fine 50-micron layer height slicing profile and saw some problems with underextrusion, strings, and retraction. Type A support advised tweaking the slicing settings, lowering the speed and temperature, and measuring the filament’s real width using calipers. This advice was spot-on; our prints looked great afterwards, even on Ultra Fine.

SIP06-TypeA-robots

In with the New: 2014

Compared to the 2013 model, the 2014 Series 1 ($2,295) boasts a clean industrial design, huge volume (the biggest in our tests), enhanced gantry mechanics, a glass build platform, and a new sheet-vinyl surface overlay that might just dethrone blue painter’s tape for printing PLA. A particularly interesting new feature, developed from user feedback, is an easy-to-remove, low-cost extruder nozzle cheap enough to be considered “disposable” if it clogs. Type A also promises a new “hacker-friendly” warranty that they’ll honor even if you’ve modified the machine.

Though the beta-stage prototype we tested did not have an onboard display (one was being considered for production), it did have another innovation — built-in wi-fi control via Octoprint, an open-source, web-based printer client that sends G-code and controls the printer via an embedded Linux platform. Installing Octoprint typically requires use of the Linux command line, but the Series 1 does it for you — it’s got a BeagleBone Black single-board computer with Octoprint preinstalled.

Our single test print showed minor PLA retraction issues that resulted in undesired stringing between free parts of the model, but we had only a few hours with a beta machine, so we can’t yet judge print quality. It’s worth reiterating that Type A’s 2012 and 2013 machines printed very well.

Conclusion

The Type A Machines 2014 Series 1 sets itself apart with the addition of integrated wireless printing, a sleek industrial design, and hacker-friendly warranty. It’s also slated to be compatible with direct printing from Windows 8.1. We look forward to this machine’s official release, anticipated in late October; check makezine.com/review for an updated review.

Primo features

  • Built-in wi-fi; Octoprint web-based printing
  • Biggest volume we tested
  • Modular, swappable parts
  • Hacker-friendly warranty
  • “Disposable” extruders

Who’s It For?

  • Makers
  • Students
  • Architects
  • Makerspaces

Pro Tips

  • Use a spritz of hairspray for better material adhesion.
  • Connect to your router via Ethernet cable if wireless printing gives problems.
  • Clogged nozzle? Toss it and install a new one.

Ultimate Guide to 3D Printing 2014This review first appeared in MAKE’s Ultimate Guide to 3D Printing 2014, page 80. Check out the full issue for more!

4 thoughts on “Review: Type A Machines Series 1

  1. foosel says:

    Just for the record (if anyone is wondering): OctoPrint is available at http://octoprint.org, also runs on Raspberry Pi (for which there exists a ready-made sd card image with OctoPi which also supports the RaspiCam) and should support any printer running Marlin- or Repetier-compatible firmware.

  2. Brad says:

    It says you printed with “the bundled 1.75mm red PLA,” but the print is blue. I assume the blue is from the prototype? Could you post the red sample from the 2013 machine?

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged
Chris McCoy

Chris McCoy is a 3D printing instructor at TechShop San Francisco. He is also co-founder of You3Dit, a distributed global network of 3D printers and CAD designers.

View more articles by Chris McCoy

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK