CheeseDuck writes – “Make a real blowgun from parts readily available in most homes!” – Link.
10 thoughts on “HOW TO – Make a Blowgun (darts)”
Comments are closed.
HOW TO – Make a Blowgun (darts)
CheeseDuck writes – “Make a real blowgun from parts readily available in most homes!” – Link.
Comments are closed.
I used to make blowguns from 3/8ths pvc and the darts from pins stuck through plastic valve stem caps from bicycle tubes .you can ask the other kids in the neighborhood it worked really well,(well not for johnny)
I used to make blowguns from 3/8ths pvc and the darts from pins stuck through plastic valve stem caps from bicycle tubes .you can ask the other kids in the neighborhood it worked really well,(well not for johnny)
I used those plastic round caps (for cap guns) fitted to a pin as shown, and blown through a straw. I really am sorry for prematurely ageing my mother.
Rigid wire cut at an angle for point, then heated and melted into plastic beads worked great for me.
i make blowguns with rolled up magazine paper and darts with magazines and tooth picks at the tip