CRAFT Project: Fabric-Embellished Notecards

Paper Crafts

In this day and age, receiving a handwritten note is a special and all-too-rare treat. If the card itself is handmade, that’s even better! Here’s a project that uses blank note cards from the craft store and fabric scraps from your stash to create one-of-a-kind embellished greetings that are sure to perk up anyone’s day.

• Blank note cards
• Cardstock
• Assorted fabric scraps
• Embroidery floss and needle
• X-Acto craft knife
• Scissors
• Mini-hole punch
• Glue stick
Bone folder
• Ruler
• Scotch tape
• Pencil
Start by drawing a simple shape on the front of the note card — I drew a heart. Then draw a slightly larger outline of this shape as a guide for where to place your hole punches. (I made my line about ¼" larger than the first shape I drew.) Cut out the center shape using an X-Acto knife.
Next, use a mini-hole punch to create a dotted outline all around the shape you cut. I punched my holes about ¼" apart. Then cut a piece of fabric that will cover both the cutout shape and the holes you just punched. Use the glue stick to coat the inside of the card’s front and place the card glue-side down on top of the fabric. Smooth the layers down and allow to dry.
Thread your needle with some embroidery floss — I chose to use 3 strands rather than 6 so the card would have less bulk, but it’s up to you. Starting in the back (inside) of the card, begin stitching through the holes you punched. Instead of knotting the floss at the end, though, use a bit of Scotch tape to hold it in place.
When you’re inserting the needle from inside the card (where the holes aren’t visible), you can hold it up to the light to see exactly where to place your stitches. Once you’ve gone all the way around, end your stitching inside the card and remove the Scotch tape. Tie the floss in a small knot and snip the ends. If your ending stitch happens to end up at the front of the card, just push the needle through the card and fabric layers towards the back — no big deal.
Now cut a piece of cardstock (or other opaque paper) using the ruler and X-Acto knife. The paper should be slightly smaller than the card itself, and it’s nice to choose a contrasting color. If you like, you could round the corners using a corner punch, as I did. You could also cut the edges of the paper with decorative scissors if you like.
Cover the back of the cardstock with glue and adhere it, glue-side down, to the inside of the note card to cover the wrong side of your fabric and stitching. I used a bone folder to help smooth the paper down and sharpen the crease of the card. It also helps everything lay flat if you place the card under a stack of books to dry. Once it’s dry, it’s ready to send and enjoy!

Discuss this article with the rest of the community on our Discord server!
Jenny Ryan

Jenny Ryan is an artist, crafter, and maker of things. She lives in Los Angeles with a pack of various animals (including her husband) and writes about her adventures in creating at Exit Through the Thrift Shop.

View more articles by Jenny Ryan


Ready to dive into the realm of hands-on innovation? This collection serves as your passport to an exhilarating journey of cutting-edge tinkering and technological marvels, encompassing 15 indispensable books tailored for budding creators.

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).