DIY LADIG cutout bounce card

Craft & Design Photography & Video Technology
DIY LADIG cutout bounce card

Last month at MacWorld I stopped by the LADIG booth to see what all the fuss was about. Making my way through the swarm of DSLR toting macheads I finally got to the booth to find beaming LADIG members handing out these fantastic cutout bounce cards. If you’re unfamiliar with LADIG:

The LADIG (Los Angeles Digital Imaging Group) is dedicated to advancing the art and science of digital imaging in all its forms.

Membership is open to all digital imaging professionals: photographers, designers, illustrators, prepress providers, software and hardware developers, fine artists and corporation communication workers…

The version I got was offset printed on nice card stock. You just cut along the outside edge of the black area and attach Tab A, Tab B, and the Back to your flash with sticky back velcro and you’re good to go.


If you would like to print your own, the folks at LADIG were kind enough to mention that they have a downloadable PDF on their website.

2 thoughts on “DIY LADIG cutout bounce card

  1. busycraze says:

    This is very great and awesome to view these events, its great opportunity for professionals in photography and artists.

    Acer Predator

Comments are closed.


I make cool stuff and write about other people making cool stuff on If you have something you think I should see, send me a tip.

View more articles by Adam Flaherty