Print with Glass Using MIT’s New Molten Glass Extruder

3D Printing & Imaging Workshop
Print with Glass Using MIT’s New Molten Glass Extruder
3D Printed Glass Vase Showing Illumination Paterns
3D printed glass vase showing illumination patterns

A few years back I lived in Corning, New York, home of the Corning Museum of Glass. This museum is an amazing collection of glass objects from around the world. Now, Mediated Matter from MIT has created a new system for 3D printing glass that is making objects fit for the museum.

The Mediated Matter team will be releasing their full paper discussing their method of optically transparent glass printing as part of the September issue of 3D Printing and Additive Manufacturing, a journal covering 3D printing research. The team constructed the body of their machine out of aluminum extrusion — similar to the construction practices we have seen in many RepRap printers — and even uses the popular RAMPS system for its electronics.

Atop the frame sits a kiln that heats the glass up to around 1900ºF so it can be extruded through a high temperature alumina-zircon-silica nozzle. The machine functions in a very similar way as your standard FDM 3D printer, but is able to operate at much higher temperatures.

The team found a unique solution to stopping extrusion from their printer. Since the machine doesn’t use a filament that can be pushed or pulled to control the extrusion, they couldn’t just reverse the motor to stop the glass from flowing. Instead, the team blasts the nozzle of their printer with compressed air, cooling it down rapidly and causing the glass to halt in place.


Glass can’t be allowed to cool too quickly. If it does, it can become very fragile and might shatter from its own internal stresses. To prevent the glass from cooling while it’s printing, propane torches are applied to the printed piece, keeping it above its annealing temperature. After the entire print is complete, it can then be moved to an annealing oven where it will slowly be cooled to properly temper it.

Surpassing its beauty, the characteristics of glass means the ability to 3D print in glass opens many new possibilities. Glass’s strength, high-temperature capabilities, and ability to be sterilized make it an ideal material for many applications that plastics just can’t handle.

The team will be displaying works they have created with their new system at the Cooper Hewitt, Smithsonian Design Museum next year. Let’s hope the Mediated Matter team continues to develop this process, and soon we can all have these beautiful printed objects in our lives.

4 thoughts on “Print with Glass Using MIT’s New Molten Glass Extruder

  1. Dylan Karr says:

    This could make for some awesome tableware.

  2. Daen de Leon says:

    “Museum”? I know a lot of pharma & biotech companies that need this tech today. It’s hard to find people to make specialist lab glassware these days.

    1. Rachel Newman says:

      Wouldn’t you need a smooth sided vessel for that though?

      1. Brice Morin says:

        Yes, I would expect so. Though this glass printer is pretty impressive, it still has the same drawback as plastic printers: the finish. The different layers are clearly visible, with a small bump between them, where chemicals, etc are likely to get encrusted, making them very difficult to wash and potentially dangerous to use in a lab (you do not want old rest of chemical product to react with the ones you are using in a new experiment…)

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

Matt is a community organizer and founder of 3DPPVD, Ocean State Maker Mill, and HackPittsburgh. He is Make's digital fabrication and reviews editor.

View more articles by Matt Stultz


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).