3D Printing Tips: Calibrate Your E-Steps

3D Printing & Imaging
YouTube player

 

A very common problem found in 3D printing is that your E-Steps aren’t perfectly dialed in. This can result in little bulges or spots that are too thin. Most 3D printer manuals suggest that you check your E-steps when you begin, but the description of how to test can be a bit confusing sometimes. This quick video will walk you through how to check your E-steps. If you’re looking for more in depth information, Triffid Hunter’s calibration guide probably has the most information available not only on E-steps but most other calibration as well.

Discuss this article with the rest of the community on our Discord server!
Tagged

I get ridiculously excited seeing people make things. I just want to revel in the creativity I see in makers. My favorite thing in the world is sharing a maker's story. find me at CalebKraft.com

View more articles by Caleb Kraft

ADVERTISEMENT

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 16th iteration!

Prices Increase in....

Days
Hours
Minutes
Seconds
FEEDBACK