Best of 2012: 3D Printed Objects

3D Printing & Imaging
Best of 2012: 3D Printed Objects


Two thousand and twelve will probably be remembered as the year 3D printing broke into the mainstream.

While 3D printers don’t yet compete with toasters or DVD players in the home, the dam on the consumer market has been breached as the number of lower priced, easy-to-use models–and those who use them–grows. Part of this trend surely comes from the ever-expanding catalog of 3D printed objects, from the useful to the fanciful. Printing chess pieces and busts of Stephen Colbert is nice, but the range of what people create with their printers grows by the day and in turn inspires others to model and print ever more striking/utilitarian/beautiful/ridiculous/amazing objects.

What follows is a round-up of some of the more compelling items that came across our desks in 2012. As I look at the list it strikes me that it represents a moment in time. I can only imagine how such a list will look a whole 12 months from now. To the future!


3D Printed Guitar

While my friend who makes classical guitars from Brazilian rosewood might disagree, I think this is a beauty. While many 3D printed objects are more starting points or proofs of concept, this guitar reportedly sounds quite nice. And if you decide to smash it in a fit of Pete Townsend-like rage, you can just press print and make another.

Screen Shot 2012-12-21 at 10.54.02 AM

Crania Anatomica Filigre

For me, Joshua Harker’s Crania Anatomica Filigre exemplifies the complexity and beauty that can be coaxed out of an .STL file. It’s become an iconic piece of digital art that defines the promise and potential of 3D printing.

Screen Shot 2012-12-21 at 11.15.41 AM

Anatomica di Revolutis

But then Joshua’s follow-up to the Crania Anatomica Filigre might be even cooler. As a side note, the project’s Kickstarter campaign kicked up a little controversy by wading into the 3D Systems lawsuit issue.

Screen Shot 2012-12-21 at 11.21.10 AM

McCormick D326 Tractor

At the unveiling of MakerBot’s Replicator 2 in October, the McCormick D326 tractor was one of the objects Bre Pettis used to demonstrate what the printer could do. It was a very effective demonstration.

Screen Shot 2012-12-21 at 10.27.43 AM

3D Printed Record

What do you get when you use a $50,000 3D printer to create a 3D printed LP? A really expensive, poor recording of Nirvana’s “Smells Like Teen Spirit.” But like so many 3D printed objects, the point is not the end result, but a hint of what’s to come. Have a listen.


YouTube player

3D Printed Mountain Bike and Other Big Stuff

While I wouldn’t want to bomb down a rocky trail on a frame made of ABS plastic, the mighty Objet 1000 is a beast of a printer than can print full scale models. Of course with a 1000mm x 800mm x 500mm build volume it’s not exactly a desktop model or remotely affordable, but it still makes cool stuff. Trek uses a smaller Objet Connex500 to prototype their designs.

Screen Shot 2012-12-21 at 11.46.17 AM

Gyroscopic Snowflake

It’s not visible in this picture, but the cool thing about this simple object is there are little pins built into the model, and when you wiggle it, the snowflake breaks free and can spin around as does the little snowflake in the center. If you’ve got a 3D printer this is a simple holiday decoration or gift.

Screen Shot 2012-12-21 at 11.56.27 AM

Dodecahedron Speaker

MAKE technical editor Sean Ragan posted this on MAKE Projects. He writes:

At normal listening distances, an array of twelve speakers arranged on the faces of a dodecahedron is a very good approximation of a point sound source, and the sound waves it produces are very close to perfectly spherical. A dodecahedron speaker can be a useful tool in acoustics research, and is definitely a fun toy to pull out at parties. They are available commercially, but very expensive. Some people build their own, but the odd compound angles and the high degree of accuracy and precision required in the parts make for challenging work with manual tools. But it’s easy for a 3D printer.

To that I would add it’s cool to say, “hey, wanna jam some tunes on my 3D printed dodecahedron speaker?”

YouTube player

Transforming Robot

I found this one over at Amnesia Blog. It’s a 3D printed robot from Brave Robotics that transforms from a remote-controlled car into a walking robot with a wifi camera, and headlights. Oh, and it shoot darts from its arms. Take that, Megatron.


iPhone Phone

Chris Krueger posted this on Thingiverse as his entry for the “absurd iPhone accessory contest.” I say he wins. It’s practical, but a tad bulky.

2013 MAKE Ultimate Guide To 3D Printing

  • 3D Printers Buyer's Guide — 15 Reviewed
  • Getting Started in 3D
  • Learn the Software Toolchain
  • 3D Design for Beginners
  • 3D Printing without a Printer

Buy now!

Just Released! 2014 MAKE Ultimate Guide To 3D Printing

30 thoughts on “Best of 2012: 3D Printed Objects

  1. Will Lyon says:

    Bre Prentis?

  2. Abe Orton says:

    The printed 12″ ‘single’ reminds me of an Edison cylinder. “A century of technological progress.” Yeah. Full circle?

  3. Jason Anderson (@JasEriAnd) says:

    I used Sculptris, Zbrush, and Shapeways to make a sugar skull pendant for my wife’s christmas present this year. It was amazing and I’m going to make a whole series of them.

  4. MAKE | Best of 2012: 3D Printed Objects « Safegaard – News Magazine says:

    […] See on […]

  5. Best of 2012: 3D Printed Objects « pundit from another planet says:

    […] More via –> MAKE  […]

  6. Best of 2012 3D printed objects. « STEM – ROBOTICS EDUCATION says:
  7. Kurt says:

    I think that McCormick tractors are red. The tractor on this page looks more like a John Deere.

  8. Beady Eyed Craftster: Branding, Printing & Recapping | UnRuley Articles says:

    […] • Something that really seemed to gather steam in 2012 was 3D print­ing. Even though it’s been around for a while, 2012 seemed to be the year when main­stream media really star­ted to pick up on it. MAKE has a great set of examples in “Best of 2012: 3D Printed Objects”. […]

  9. Weekly Ramblings – Astronaut Tweets 3D Fireworks Spelling Science | Richer Ramblings says:

    […] printing time! Over at MAKE, they have a great list of the best 3D printed objects in 2012. What a list it is! A guitar, a […]

  10. MAKE | Your Comments says:

    […] the article Best of 2012: 3D Printed Objects, Abe Orton […]

  11. Best of 2012: 3D Printed Objects | L'atelier salaamandre says:

    […] Lire la suite sur Make Magazine […]

  12. 3D Printer at Studio 300! | says:

    […] typical 3D printed items are artistic objects, advanced 3D printers already show the potential to print an incredible range of objects from human […]

  13. Smith Jones says:

    I am amused by reading marvellously good 3D printed objects collected from round the world.

  14. Future Vision says:

    […] is easy to get excited about 3D printing when pictures of stunning printed objects abound the web. However, buying a 3D printer is barely the beginning of creating cool objects like […]

  15. Printing Company Materialise says:

    Printing Company Materialise

    Best of 2012: 3D Printed Objects | MAKE

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

Stett Holbrook is editor of the Bohemian, an alternative weekly in Santa Rosa, California. He is a former senior editor at Maker Media.

He is also the co-creator of Food Forward, a documentary TV series for PBS about the innovators and pioneers changing our food system.

View more articles by Stett Holbrook


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).