Jim writes in –
If you have a project in mind that you want to make, but you’re not sure how to get started, the folks at TechShop invite you to come to the TechShop Project Kickoff and BBQ on Saturday, October 4 at TechShop Menlo Park and get expert help.
A panel of expert makers (including TechShop staff, TechShop Instructors, and TechShop’s founder Jim Newton) will field your questions, offer advice, and help get you moving in the direction of success with your project, no matter how big or small.
This event is free and open to everyone who has a project they want to build, and you don’t need to be a TechShop member to attend. Just bring your project ideas and your thinking cap.
TechShop is a membership-based DIY workshop that gives you access to tools and equipment, wide-open workspace, expert instruction, and a vibrant community of makers so you can build the things you have always wanted to make.
TechShop Menlo Park Web Site: http://www.techshop.ws
2 thoughts on “Get a jump start on your project at TechShop Menlo Park, CA this Saturday”
I might be running a sort of unofficial electronics hacking / Arduino workshop there too, just bring your gadgets and look for the messiest work table. Mandatory break for the delicious free BBQ.
Comments are closed.