A. STANDARD PROP
The same “tractor” propeller used on standard front-engine R/C airplanes.
B. “PUSHER” PROP
These contra-rotating props exactly cancel out motor torques during stationary level flight. Opposite pitch gives downdraft.
Usually a brushless electric “outrunner” type, which is more efficient, more reliable, and quieter than a brushed motor.
D. MOTOR MOUNT
Sometimes built into combination fittings with landing struts.
E. LANDING GEAR
Designs that need high ground clearance may adopt helicopter-style skids mounted directly to the body, while designs with no hanging payload may omit landing gear altogether.
Shorter booms increase maneuverability, while longer booms increase stability. Booms must be tough to hold up in a crash while interfering with prop downdraft as little as possible.
G. MAIN BODY
Central “hub” from which booms radiate like spokes on a wheel. Houses battery, avionics, cameras, and sensors.
H. ELECTRONIC SPEED CONTROLLER (ESC)
Converts DC battery power into 3-phase AC for driving brushless motors.
I. FLIGHT CONTROLLER
Interprets input from receiver, GPS module, battery monitor, and onboard sensors. Regulates motor speeds, via ESCs, to provide steering, as well as triggering cameras or other payloads. Controls autopilot and other autonomous functions.
J. GPS MODULE
Often combines GPS receiver and magnetometer to provide latitude, longitude, elevation, and compass heading from a single device.
Often a standard R/C radio receiver unit. The minimum number of channels needed to control a quad is 4, but 5 is usually recommended.
Depending on your receiver, may be a loose wire whip or helical “rubber ducky” type.
Lithium polymer (LiPo) batteries offer the best combination of energy density, power density, and lifetime on the market.
N. BATTERY MONITOR
Provides in-flight power level monitoring to flight controller.
Pivoting mount that rotates about 1, 2, or 3 axes to provide stabilization and pointing of cameras or other sensors.
P. GIMBAL MOTOR
Brushless DC motors can be used for direct-drive angular positioning, too, which requires specially-wound coils and dedicated control circuitry that have only recently become commercially available.
Q. GIMBAL CONTROLLER
Allows control of direct-drive brushless gimbal motors as if they were standard hobby servos.
GoPro or other compact HD video unit with onboard storage. Real-time streaming is possible with special equipment.
Join Make: Community Today