Dmacrae writes –
Inspired by the puzzles made by Staves, I decided to try my hand at making my own with my jigsaw.
This is my third, and because I haven’t seen an instructables about how to do it, I decided i would post about it.
For this you will need:
- A small sheet of plywood or scrap. (I used 3/8th” which was definitely overkill and cost me a jigsaw blade)
- An image that you want to make into a puzzle,
- A jigsaw,
- A few extra blades,
- Spray adhesive,
- A little bit of patience
I got my jigsaw to do simple work with aluminium, using it as a cheap alternative to a bandsaw. besides needing to frequently replace the blades, it has slowly won me over by being able to cut tight curves and by the smaller kerf size(more on kerf later).
Making a homade puzzle, or “Why I love my jigsaw” – Link.