Make Your Own Fabber

Make Your Own Fabber


Make: reader, Palenoue, sent me to go check out this great wiki about making your own Fabber. A fabber is something every maker should be dreaming of, imagine how fun it would be to make custom parts with something like this.Link

7 thoughts on “Make Your Own Fabber

  1. Shadyman says:


  2. Shadyman says:

    Barring a 3D fabricator, how about a 3d mill? *searches MAKE and Hackaday archives*

  3. -soapy- says:

    A 3D mill is far, far harder, due to the contact nature of the milling process, and also the limitations of starting with something and taking bits off it are far greater than starting with nothing and adding only those bits you want.

    Building a laser fabber will also allow the software to work far less hard, as you just have to convert it into slices of the right thickness then create each layer in the right order. With a mill, you have to factor that you cannot cut a hole smaller than your cutter, you can’t cut a horizontal hole unless you have a way to mill from the horizontal axis (hence the creation of 6 axis milling machines! There is a lot a 3 axis machine cannot do), your head will collide if you try to cut deeper than the shank of the tool, etc.

  4. hammerthumb says:

    This is an awesome step in the right direction.

    I’m concerned about two things:

    1) The cost of the consumables – plastic resin in small quanities is kind of expensive. OTOH if this takes off the market should fix that. Also, there may be cheaper alternatives for the DIY person such as recycling waste plastic and paper. Imagine making your own strong 3D recycled, corrugated, thing-a-majig for only the cost of electricity!

    2) The obstacles to “Democratization” – Here in America intellectual property law and enforcement is mostly controlled by selfish interests. The DHS has already been active in enforcing IP laws (something to do with rubik’s cubes knock-offs if I recall.) Without the blessing or negligence of the powers-that-be I worry that this project might not be allowed to reach wide adoption due to some sort of copyright, patent, lawyer, bureaucrat, lawmaker nonsense.

    These things won’t stop me from putting a Fab@Home on my Christmas Wish List and exercising my voting rights though :)

  5. emalone says:

    Thanks very much for the attention to Fab@Home. I wanted to let everyone know that the official URL is, and links to the site via other url’s will no longer work. Sorry for the trouble.
    Evan (Fab@Home inventor)

  6. taken 3 full movie free online says:

    Thanks for your article. Another thing is that just being a photographer requires not only difficulties in capturing award-winning photographs but in addition hardships in acquiring the best video camera suited to your requirements and most especially hardships in maintaining the standard of your camera. This is certainly very accurate and evident for those photography enthusiasts that are into capturing the particular nature’s interesting scenes – the mountains, the actual forests, the wild or the seas. Visiting these amazing places absolutely requires a digital camera that can surpass the wild’s severe surroundings.

  7. corneliosl says:

    Je demande pardon, cela ne me convient pas. Il y a des autres variantes ?

Comments are closed.

Discuss this article with the rest of the community on our Discord server!


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).