Jenny stopped in and we chatted about metal etching, she later made her own cards for a lot cheaper than I was — Cheap as in you still need a laser, but cheaper…
…pt made his using metal blanks found here, but I decided I needed a cheaper and quicker method. So I started looking around the shop (I work at Creative Awards & Promotions in Woodstock GA) and realized I could just one sheet of 24×12 outdoor aluminum and print a grid of cards on them instead of individually engraving blanks.
After I found the appropriate material I slapped it into the laser and set out making the vector file. I used Corel Draw X3 to make one template card and then duplicated it until I had filled one sheet of 24×12 outdoor aluminum (I ended up fitting 30 cards).
DIY: Metal Business Cards on the Cheap – Link.
ADVERTISEMENT
