Speed soldering @ Maker Faire 3pm to 4pm

This weekend we’re going to have a speed soldering competition at Maker Faire 3pm to 4pm on Saturday & Sunday. Pick up a TV-B-Gone at the Maker Shed (or bring your own unassembled) and we’ll have multiple heats for an hour each day. At the end of Maker Faire we’ll crown a speed solderer!

8 thoughts on “Speed soldering @ Maker Faire 3pm to 4pm

  1. Jim Horn says:

    Some questions for someone who’s been soldering for decades:
    1) Do we need to bring our own equipment (iron, solder, flux, pliers, cutters, etc.)?
    2) *May* we do so if we don’t have to?
    3) Is 120VAC power available if we bring it?
    4) Is there any allowance for soldering quality, or is it a “first kit working” contest?

    I solder fairly fast and very well – but can turn on the speed if needed.

    Many thanks for what sounds like a fun event – and a *terrific* Faire!

    Jim Horn (was at the ’06 Faire and eager to return)

  2. The Oracle says:

    Excellent questions. I would think for the contest to have any meaning, we’d have to have access to our own equipment.

    It’s an interesting contest idea. I like to take my time when I’m soldering, I truly savour the process and to an excellent quality job (I even make paper spacers so all my resistors, etc, are the same distance from the board about half a milimeter above).

    If I turn on the speed, I wonder what will happen to my quality.

    Solder quality would be too subjective, it would have to be first working kit. But if I’m paying for the kit, I’m not sure I’d want to do such a sloppy job and be stuck with it. I’d probably take a part and rebuild it later assuming the board quality is high enough that I don’t pull off the traces.

  3. macetech.com says:

    I think they should make it a REAL challenge, and provide entrants with the kit, a Bic lighter, a rusty nail, and a handful of fishing sinkers.

  4. The Oracle says:

    If that’s what I had, I’d try and pour the lead over the board in an imitation of a wave soldering machine. It would be all cold solder joints, but it might work well enough to win.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).