By Scott Bedford
Turn war into peace by converting a children’s action figure into a peace-loving bookend. Or if you don’t have a soldier, try using an old space ranger (you know the one I’m thinking of) or any other large toy figure.
For a PDF of this tutorial, visit the build page on Make: Projects.
Materials
Large plastic action figure
Hacksaw
Sandpaper or craft knife, if necessary
Jigsaw
Piece of 10mm (a little over 3/8″) thick wood, MDF/plywood
Electric drill
Nut and bolt 6-8mm diameter, 40-50mm long
Epoxy adhesive
Directions
The technique for turning your action figure into a bookend is slightly dependent on the type of action figure you have and the thickness of the shelf – so please treat the instructions below as a guide, and be prepared to improvise if necessary.
Step 1-2: Use a hacksaw to remove a section, about 10-15mm (approx. 3/8″ – 5/8″) wide, from the waist of the figure. If necessary, use sandpaper or a craft knife to smooth any rough edges.
Step 3-5: Using a jigsaw, cut two oval discs from a piece of the wood – each disc needs to be slightly bigger than the waist. Drill a hole through the center of each disc (large enough for the bolt to pass through). Now drill a counterbore (another larger hole over the first hole, but only halfway through – for more details see http://en.wikipedia.org/wiki/Counterbore). This needs to be big enough to accommodate the head and nut of a bolt. Use epoxy glue to attach the nut into the one hole, let it set, then use more epoxy glue to stick the torso of the action figure to the wooden disc.
Step 6-7:Glue the head of the bolt into the other piece of wood. Once set, use more epoxy glue to attach the wood disc to the legs.
To install the bookend, drill a hole through your bookshelf and push the bolt attached to the legs through the hole. Screw on the torso, but don’t over-tighten. Have fun arranging the arms and legs into crazy positions – and if at any time the arms and legs start bending due to the weight of the books, use the epoxy-based glue to fix all the joints.
About the Author
Scott Bedford is author of the award winning whatimade.com – a quirky arts and crafts blog containing an eclectic mix of recycling projects, décor, kids crafts, and utter nonsense (all supplied with fun hand-drawn tutorials and downloadable artwork).
9 thoughts on “How-To: War and Peace Bookend”
Comments are closed.
By far the coolest thing I’ve seen today. Will do it with my Barbie. Bwahaha. :)
This reminds me of something I did when my son (he’s now 25) asked for a GI Joe for Christmas. Tho I did NOT want to get him a GI Joe in uniform, I decided to go one better and made a couple of changes to the uniform. That Christmas, both of us got what we wanted: he got himself a male action figure toy, and I got to alter the uniform with fabric paint so that my son could play with a UN Peacekeeper! Hey, we’re Canadian and very proud that the idea of the UN Peacekeepers (soldiers paid to keep the peace, not fight!) came from our cherished former prime minister, Lester B. Pearson.
This reminds me of something I did when my son (he’s now 25) asked for a GI Joe for Christmas. Tho I did NOT want to get him a GI Joe in uniform, I decided to go one better and made a couple of changes to the uniform. That Christmas, both of us got what we wanted: he got himself a male action figure toy, and I got to alter the uniform with fabric paint so that my son could play with a UN Peacekeeper! Hey, we’re Canadian and very proud that the idea of the UN Peacekeepers (soldiers paid to keep the peace, not fight!) came from our cherished former prime minister, Lester B. Pearson.
[…] 11. Deja un militar para proteger sus libros favoritos 12. Si tiene unos 20.000 Legos por ahí, se podría diseñar una escalera 13. Piezas de construcciones en útiles ganchos 14. Montar una estación de carga para los aparatos eléctricos 15. Crear un llavero con un coche de juguete antiguo […]
[…] Put your action man to work holding up some books. Find the tutorial here. […]
[…] a wacky bookend – use an army […]
[…] a wacky bookend – use an army […]
[…] [makezine] […]
[…] Put your action man to work holding up some books. Find the tutorial here. […]