Qibo made a nice AVR based USB SD card reader (doh, note – you need to register to view the projects on AVR Freaks) –
his project is for studying USB interface and MassStorage protocol.
Perhaps, because I should not using AVR device which has no extended bus,
or should not using SD card as the medium but others which has parallel interface. The speed of this work is quite slow, Read 370KB/s and Write 195KB/s.
But this project is quite simple for studying USB.
The function of this board is USB SD card reader. Since It adopt MassStorage protocol, It will be treated as a removable disk when plug in the computer, just like a flsh disk.
Using the attached code it will be shown as a hard disk, because I can use the function of the hard disk (eg, partition). Of course just change a character of the code it will be a removable disk.
:: AVR Freaks – USB SD Card Reader Link.
4 thoughts on “AVR based USB SD card reader”
Try looking at SD Card World.co.uk found old discount codethat still works 20% off on website http://www.sdcardworld.co.uk[url=http://www.sdcardworld.co.uk/index.php?route=common/home%5DYour texthere[/url]
I got a great deal on a 32g sdhc card
Hey,It’s informative article.I enjoyed to read it .In this article very useful tips.Thanks to sharing it. Pretty much any brand of AVR based usb sd card reader will work — make sure you get one that says SDHC compatible.
Comments are closed.