Build a frequency generator on the cheap

Build a frequency generator on the cheap

This tutorial shows how to build a frequency generator out of parts found at your local Radioshack. Pretty simple construction and nice detail on the enclosure with a nice array of dip switches.

How to make a Frequency Generator

4 thoughts on “Build a frequency generator on the cheap

  1. robert ca says:

    Ugh arrrgh, I tried to get this circuit to work and couldn’t get it to function. I ohm out all my solder connections, checked voltages to and from the chip and chip is okay checked to make sure no cold solder joints. a frustrating tutorial at best. Interestingly enough if I short out 3 & 4 I can hear the tone being generated any thoughts. I really need this to work thanks

  2. Dre says:

    What are the measurements of the project box & possibly a link to buy one.

  3. Stan Khalevra says:

    Is it possible to use the frequency generator to tamper with other devices that use microwave and radio frequency.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!