DIY: Breadboard Power Connectors

DIY: Breadboard Power Connectors

John sent us his flickr set that shows you how to make these really nice Breadboard Power Connectors. Thanks John!

Inspired by a couple of posts on the Make magazine website, I made up a set of leads to connect my bench power supply to a solderless breadboard. I used a couple of old 8-pin wirewrap sockets, some wire recycled from a PC ATX power supply, and four 4mm plugs (to fit the bench PSU). I made four leads because my PSU has three outputs, plus ground.

Discuss this article with the rest of the community on our Discord server!


Ready to dive into the realm of hands-on innovation? This collection serves as your passport to an exhilarating journey of cutting-edge tinkering and technological marvels, encompassing 15 indispensable books tailored for budding creators.