
Dimmie writes –
This week Ive been working on a POV. Its my first microcontroller project ever and it has been very interesting. The microcontroller I used is an Atmel ATMEGA16 programmed with an Atmel AVR Dragon. The next step is to make it turn arround on a motor and calibrate itself automaticly with help from a base-placed IR-diod. I have even talked with a local company that will hopefully provide me with a bluetooth module to make posible dynamic text change from mobile phone or any other bluetooth device.
Hand-powered POV – Link.
6 thoughts on “Hand-powered POV”
Comments are closed.
And for those didn’t browse the site, here is the next version I made, with limiting resistors on each of the LEDs:
http://dimme.net/2007/11/12/hand-powered-pov-version-2/
And for those didn’t browse the site, here is the next version I made, with limiting resistors on each of the LEDs:
http://dimme.net/2007/11/12/hand-powered-pov-version-2/
Your comment will be posted in the background and may take a few minutes to appear on the site; you do not need to re-post.