Mage2 writes –
“Using a Heatgun to remove/ scavange parts from old or broken PCB. I using a old hard drive as a example. You can salvage most any surfacemount, BGA or even through hole parts using this method.” – Link.
Related:
6 thoughts on “Heat gun desoldering overview”
Comments are closed.
If you need heat guns, there is a great deal on Steinel electronics heat guns at http://www.electronicsnmore.com
If you need heat guns, there is a great deal on Steinel electronic heat guns at http://www.electronicsnmore.com. Here is the link to a complete kit they carry: http://www.electronicsnmore.com/product_info.php/products_id/8970
try concentrating and targeting the heat with a pinpoint reduction nozzle – makes desoldering even easier & you won’t damage other components by accident
only ELECTRONIC heat guns will take reducers, though, since regular heat guns would burn out due to the heat back-up