Homebrew through plating machine

Technology
Homebrew through plating machine

Tps Small
M writes – “I got sick of waiting for my PCB’s to be made externaly and therefore wanted to be able to produce PCB’s for my prototypting needs by myself. Now, it is not too difficult to create even double sided PCB’s at home. However, having the vias conect the two layers by hand is a real pain. More advanced layouts also can’t be made with doulbe sided PCB’s and that’s then usually the end of the rope when it comes to homebrew PCB’s. Unless you have a through plating station of course! Having such a machine put’s you in the position to create real multilayer PCB’s on your own – something I was dreaming of for long. This page is intended to give you ideas on how to build your own station. “Link.

8 thoughts on “Homebrew through plating machine

  1. cheesy says:

    It would be nice if he actually explained how it worked.

  2. Atharsia says:

    would be great to get some recent updates, look like he droped the page in ’03…

  3. ezitis says:

    Some good resources how to make quality PCBs on a modest budget.
    http://www.ezoflash.com/create_pcb.htm

  4. ezitis says:

    Some good resources how to make quality PCBs on a modest budget.
    Create PCB

Comments are closed.

Tagged

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone
FEEDBACK