A First Look at SeeedStudio’s New Wio Link IoT Module

Internet of Things Other Boards Technology
A First Look at SeeedStudio’s New Wio Link IoT Module
The Wio Link (Credit: SeeedStudio)
The Wio Link (Credit: SeeedStudio)

Right now almost every microcontroller board, or single-board computer, that launches claims to be the perfect platform to develop applications and devices for the Internet of Things. Most are what I call “kitchen sink” boards, because their approach is to just throw another radio at the problem. The new Wio Link from SeeedStudio is not one of these boards.

Instead the Wio Link takes a stab at putting together an ecosystem, rather than a platform. Based around the ESP8266 microcontroller, the board comes with connectors for Seeed’s now ubiquitous Grove System and is plug and play. You just plug your chosen Grove modules into the board, and open up Seeed’s iOS or Android application. From there you can connect to and configure the board, automatically generate firmware, and then upload it to the board over the air, directly from your phone.

YouTube player

But there’s a lot more here than an absence of breadboards and jumper wires, it commoditises both sensors and actuators. This is the first step towards sensors-as-a-service.

Out of the box you can use Seeed’s IFTTT channel to build basic applications, and IFTTT’s own Maker channel to connect your Wio Link to, well, pretty much anything. However you can also access the cloud-based REST API that the board’s firmware provides directly from your favourite programming language — whether that’s Python, PHP, or Javascript, if it can speak to the web, it can speak to the board.

The Wio Link and its connectors. (Credit: Seeed Studio)
The Wio Link and its connectors. (Credit: Seeed Studio)

For people used to boards like the Arduino, or even the Raspberry Pi, this can seem like a strange model. All the “smarts” are elsewhere, like the MetaWear boards from MbientLabs, the real software development is done elsewhere, on phones, or in the cloud. As a result, the Wio Link is intended for software hacking rather than hardware hacking, for rapid prototyping, and product development. This is hardware development for software developers, or designers, and it’s making a real stab at commoditisation of something that (until now) has taken specialist knowledge.

The Wio Link launched on Kickstarter today, with a number of different backer tiers — from a single board costing just $9 (with early bird pricing), to a deluxe kit with two boards and a huge range of Grove modules at $89. The board is expected to ship in February next year.

5 thoughts on “A First Look at SeeedStudio’s New Wio Link IoT Module

  1. Mike Jennings says:

    I should think it’s hardly the first. This sounds an awful lot like particle.io for example.

    1. kfihihc says:

      The PM of Wio Link is here. Actually we don’t provide cloud infrastructure for collection sensor data which particle.io and adafruit.io does. Wio Link can be integrated to AWS IoT or Azure IoT quickly, it depend you. The server we developed more much like a “bridge” between Sensor and Virtual Things( we call it as API), and it can be deploy to local or internet.


      1. Mike Jennings says:

        Thank you for the clarification.

  2. Ten Wong says:

    The point is take Arduino Module such as Seeed Grove become to Web RESTful API.
    So web developer easy to use.

  3. MrJamieBailey says:

    Here is a more in-depth review of the Wio Link from initial setup to using it in a couple of different projects: http://blog.initialstate.com/review-wio-link/

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

Alasdair Allan is a scientist, author, hacker and tinkerer, who is spending a lot of his time thinking about the Internet of Things. In the past he has mesh networked the Moscone Center, caused a U.S. Senate hearing, and contributed to the detection of what was—at the time—the most distant object yet discovered.

View more articles by Alasdair Allan