Oxygen sensor simulator

Technology
Oxygen sensor simulator

O2Sim
O2Simsch
Bob writes – “The oxygen sensor simulator as built on a protoboard. Note the cigarette lighter plug used for power source. The adjustment knob is at the left, and the switch is on the right. The red indicator LED is in the middle. Only use red, because the voltage drop of the LED is part of the circuit!”

…good project for the drag racers (from the Q&A)

“I do racing on the weekends with my street car. Will this project help me tune the car to different conditions? A: If you do drag racing, yes. The races are short enough you can set a mixture and it will hold long enough. Each time you start the car it will go to the mixture you set. Other forms of racing take too long, and the mixture will creep towards very rich, you’d have to adjust the knob while driving.” [via] – Link.

Discuss this article with the rest of the community on our Discord server!
Tagged

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone

ADVERTISEMENT

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 16th iteration!

Prices Increase in....

Days
Hours
Minutes
Seconds
FEEDBACK