One of my first builds for the MAKE blog was the mint tin fume extractor. I was hoping someone would make a version and post it on the web, and it finally happened. Thanks for the link Phil, and a big Thank You to Shawn for posting a video of your mint tin fume extractor.
More about a Reader built fume extractor from the MAKE blog
Did you ever make a project from the MAKE blog? If so, send us a link so we can share it with our readers. Thanks!
8 thoughts on “Reader built fume extractor from the MAKE blog”
Comments are closed.
Here’s my instructable on the subject:
http://www.instructables.com/id/Recycle_an_old_power_supply_into_another_fume_ex/
@lowercase
Thanks for the link!
Looks like a cool project, but you really need to add the activated carbon filters. The case is awesome, and there is plenty of room to add 1 or 2 layers.
Here’s my instructable on the subject:
http://www.instructables.com/id/Recycle_an_old_power_supply_into_another_fume_ex/
I’m now not positive where you’re getting your information,
however great topic. I needs to spend a while learning more or understanding
more. Thanks for magnificent information I used to be looking for this information for my mission.