“Blind Juggler” bounces ball without sensory input


Thanks to careful engineering, this blind juggler robot is able to keep a ball bouncing on it’s surface without any feedback about where the ball may or may not be. At first glance, it might seem like this is an open-loop control system, however the trick is that the clever design of the bouncing surface and actuation rate actually provide a built-in form of feedback. The curvature of the surface is set up so that a ball with a known springiness (coefficient of restitution) will receive just enough force in the sideways direction to nudge it back towards the center. Additionally, the height of the ball’s bounce is kept in check by accelerating the actuator unevenly, so that if the ball hits the plate too early, it receives extra force so that it bounces higher and takes longer to come down next time.

Besides just being a fun experiment, adding this kind of built-in mechanical feedback can make it easier to develop traditional feedback control systems. [via boingboing]

4 thoughts on ““Blind Juggler” bounces ball without sensory input

  1. Jedite83 says:

    I would have liked to have seen some video shout from the side.

    1. Matt Mets says:

      There are some on their website, for instance: http://vimeo.com/1621390

Comments are closed.

Discuss this article with the rest of the community on our Discord server!


Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).