John Teel

9 Costs That Factor into Mass Manufacturing a Hardware Product

05/22/2017

Without question, the costs for mass manufacturing are the most critical expenses when bringing a new hardware product to market.

The Setup and Certification Costs of Mass Manufacturing Your Hardware Product

05/19/2017

Scaling from prototype to mass manufacturing is often an overlooked step when launching a new hardware product, but it is...

3 Costs to Consider When Mass Manufacturing a Hardware Product

05/11/2017

Developing a new electronic product for mass manufacturing is not simple or cheap. Follow these three steps so you do...

5 Things to Consider When Choosing a Wireless Technology for Your Product

10/12/2016

When you're making an electronic device with wireless capability, it's really important to know what your priorities are.

How to Design a Microcontroller Circuit

09/19/2016

This article will focus primarily on the circuit design considerations of incorporating an ARM Cortex-M microcontroller.

12 Specs to Consider When Choosing a Microcontroller for Your Product

09/06/2016

Don't know the first thing about microcontrollers? Well, here are some basics.

7 Fatal Mistakes to Avoid on Your PCB Design

08/15/2016

The devil's in the details in creating a custom PCB design, so pay attention and don't make these 7 fatal...

How to Develop a Sellable Bluetooth Low-Energy (BLE) Product

08/01/2016

Bluetooth Low-Energy (BLE) is a great bluetooth solution for your electronics product even if energy use isn't a factor.

Adding GPS to Your Electronic Product (and How to Scale Up)

07/06/2016

If you're planning on making a product with GPS capabilities here's what you'll need to know about available GPS modules...

Turn Your Electronics Project into a Sellable Product

06/13/2016

Have an idea you’d like to bring to market? In this series, John Teel walks through the process of scaling...