CEB: Secondary Arms | Make:

By Brianna Kufa

Print this Project

CEB: Secondary Arms

Secondary arms act as part of the support structure for machines like the CEB Press.

Steps

Project Steps View All
1. Punch 2 holes in each...

Advertisement

Step #1:

CEB: Secondary Arms

CEB: Secondary Arms

CEB: Secondary Arms

Punch 2 holes in each arm on the 6" side of the angle. They are symmetrical.
Place the 4 leg holders as shown in the diagram.
They go on the 4" side of the angle
They are symmetrical.
Make sure they are square with the angle iron and centered vertically.
Weld them to the angle.
Repeat to make the 2nd, mirror-image arm.

Brianna Kufa

Advertisement

Make: and Maker Faire are registered trademarks of Maker Media, Inc. | Privacy | Terms

Copyright © 2004-2017 Maker Media, Inc. All rights reserved

Make: magazine cover, subscribe here

Get the Magazine

Make: is the voice of the Maker Movement, empowering, inspiring, and connecting Makers worldwide to tinker and hack. Subscribe to Make Magazine Today!

Sign up for the Make: Newsletter

Stay inspired, keep making.