I have a range of new LED lighting kits and parts available. I have designed street lights / down lights / pool lights / commercial lighting kits as well.

Keep a lookout as I will be bringing out more LED lighting kits from my design range. Now you can build up your own LED lights, and if you what to learn about LEDs then my new LED kits should do the job! They are ideal for schools and clubs or someone who just wants to change to LED lighting in their home or business.

Whatever the case may be I am available any time to help out, so if you need a kit or LED parts then let me know by email (eyecatchu@yahoo.com.au) or by Mob: 0408458645.

Project Steps

Check List.

Check kit parts list. 1 x PCB / 24 x 5mm LEDs / Hook up wire 8 x 470 ohms Resistors

Solder Resistors

Solder resistors on PCB

LED's

Solder the LED onto the PCB. Solder this end to the + side (long leg) of the PCB which is marked.

NOTE: Make sure the LED is solder the correct way round on the PCB , now if you look very closely at the LED one end has a short leg and a long leg this is the positive + end.

WARNING: LEDs ARE STACTIC SENSITIVE SO YOU MUST WEAR A UNTI STATIC WRISTBAND WHICH IS CONNECTED TO EARTH.

NOTE: (We can supply a static mat kits)

Power wires

Next Solder the hook up wire lead to PCB. The red wire in the centre.

Complete PCB Lamp

Testing

Next connect up a 12V DC power supply unit to lamp.

Your finished LED Lamp.