You’ve been working hard at your Arduino-based servo project, and so far it’s working great.
I am going to teach you how to properly set up an Arduino for this configuration and explain some basic programming.
This tutorial will give you step-by-step instructions to make your own musical glove that will produce a different note for each finger pushed.
This is a six button model of a wind instrument with a force sensor powered by Arduino that can detect combinations of keys and play many notes through a MIDI device, such as a keyboard.
You will end up with a 2-dice simulator that can be used for games and fun, and satisfaction in your new-found knowledge that you gained in the world of SMT electronics.
CarCYcle is a means of transportation that resembles a common vehicle but is operated by a bicycle.
In this guide you will learn to created an array of LEDs that visually represent the volume picked up by an electret microphone.
So you have a 3D printer and a 3D file, but now what?
This is a very simple box design using a small box (a shoe box or smaller works) with a simple lock mechanism to represent the opening of the box.
The Smart Greenhouse is based on the vision of a greenhouse that would not rely on any human adjustment while maintaining a perfect micro-climate for a particular crop being cultivated inside.
